Calling all Virginians (Tidewater area)

Nice...found one in the city huh? wait....where's the pic foo?

 

http://www.tacomaworld.com/gallery/showphoto.php/photo/159448/cat/500

Not sure how to make the picture itself show up.

It's a great fish for me, maybe nothing special to others but I was pleased.

 

NIce! Those are the best places for fish!

here ya go

 

What's up Gents, quick question....

So I've got billies on all 4 corners right now with a 1"block in the rear to level it all out. I'm thinking about upgrading the coils, something along the lines of OME or Eibach, and getting a better option in the back, like the Dakar leaf pack, but my question is will this change my ride height at all?

Oh and when's the next meet?

 

I wouldn't mind it being a little higher and if I could get away with just getting new coils I would rather just do that, does it ride well with the add-a-leaf?

Thanks for your input

 

Linwood has the adjustable 5100 set at 2.5 with on top with the factory springs. Linwood correct me if I'm wrong. His truck rides nice and sits @ 24" from the center line of the wheel to the bottom of the fender flair. (3" of lift) an add a leaf will do the back Justis if your on a budget .

 

An aal will ride better than a block in my opinion. If u want to achieve 3" in the front, do a 2" aal to level her out.

 

That's what I was thinking...not really on a tight budget but I don't want to completely scrap everything I already have..

 

There are several members that have set there billies back to 0 and have wrapped them with the 885's. Some say its not recommended but the ones that have done it are like pfffft. I may doing the same one of these days.

 

Hey jay are you runnin a lift on that bus

 

1.5" aal with billies on the corners. 2.5" up front

 

how the frame rails do they rub when going over whoops and steep drop offs

 

Damn everyone is getting a build thread, I am always left out.

 

f all datm

 

I've rubbed the frame rails but haven't teetered on em yet seems to happen on the top of hill climps

x2

 

yeah i was tryin to get some dclbs out at ure with 3 in to see how they managed

 

Here is a coilover that will go directly on your 5100s. This will be the same set-up Joejoe has on his now, and the one I am thinking about putting on my 5100s...

 

285 question: if you stick out more that the recommended 4.5 back space, will there be more rubbing on the cab mount?

and make a dang build thread already Jay and silent Steve!

 

its completely possible. in fact, probably will