anyone slammin? who has some subs?

Yes it is but I emailed the guy who makes them and asked if there was a way for him to cut it the extra 9/16 because they are only 8's, they may surprise me, but I wouldn't think that they would hit hard enough to blow the wood in the back out.

 

That's a no-go now I'm thinking of Polk Audio MM480.

 

Got 2 Rockford Fosgate Punch's P2's (10in) with a 1000watt Rockford Fosgate amp.

 

So could I add a port to that box by just 18Lx2W pvc in it then sealed the edges? I'm looking to squeeze every ounce of pressure level out of these subs.

 

I have that exact same amp. Love it.

 

Yes, but if you go ported, keep in mind the box tuning frequency and make sure you have a filter on to protect the sub if you're going to be going for max SPL.

 

what size is that box and cu ft space

 

That looks like a big box for such a small sub. Did you make it yourself?

 

Ported boxes use more space, have to subtract out the port area.

Looks like about 6" deep, about 12" tall, and about 24" wide (give or take some numbers). If those guesses are accurate, and he used 3/4" MDF, he is looking around .6 - .7 cubes (less port), which is about where most 8" subs like to be, ported.

 

Not sure, bought it off a guy

nope, but it sounds great!

 

was rockin two 10" hifonics zeus hz 10 subs till my DHD amp went and took a poop on me a couple ago

 

Just got mine it and LOVING it!



It's a 1400 watt 12" Pioneer powered by a 1000 watt Crunch amp. Not the best stuff but I picked it up pretty cheap and I love how the amp lights up. The little V on it pulses... so sweet.

 

Finaly got some pics up... excuse the box its 2 weeks old and i havent bought carpet LOL Excuse the dirty truck lol

Kenwood KDC-X895




Older Kenwood 2 channel 450w Amp (not mounted yet)
Kicker 10" Shallow mount sub and the new box, I left room on the left side for another sub at some point.


#2

 

small yeah the box?

 

Pioneer DEH-P5000UB H.U.
was using a DHD 1600w amp but it's out of commission at the moment
two 10" Zues HZ 10's

 

On your old setup how did you get set it up with the seat bracket they're like how did you do it with the box there

 

Ill try dig up some old vids and pics.
First i had 2 dd9515G on 6.5 kw rms in a 9 CF tuned 33hz with seats removed.

Then i swapped out the DDs for DC xl's for the new coil config. I was able to run my amps at .33 ohms for Bass race and burps. Gained 2.7 db on this alone.

Wasn't happy so i walled my truck with 4 Fi neo N3 15s on 2 Soundigital 12kw.
Didn't get to complete the project but did 156.6db at a show and bass raced an easy 150db.

Then stripped that out, sold it all. New project is basically as much as i can fit within a 9cf L shaped box. Custom removable infinity G35 seats for when i go wheeling/ camping and need to take my engel fridge freezer with. Most likely go with 4 12s on 6kw with a massive forward firing kelf'd port

 

holy thread revival batman!

 

Lol.

Although I would like to know more about Turttle's blow-through