Calling all Virginians (Tidewater area)

Sounds good man.

 

At the warehouse guy said they have pretty much every amsoil product u could want in stock

 

where is this?!

 

Next to RIC, if u go to asmoil.com then contact us at the bottom of that page theres a disrtibuton locator click on the va one and itll sjow u the addy

 

<~~~needs help with tranny drain and plugs

 

Liking this

 

Down could do it sat, old lady is wurkin... Going to do mine tom, hopefully

 

Drive down and replace my cv axle, leakinglike a mug but scared to let wifey drive it. Oil could be low. I can pay u in hugs and Pabst keg stands when I return.

 

word? I'll let chu kno...

 

Fo shizzle, homie g

 

got a neutral jank from a stan on that cb pic

 

Do any of you guys know what the size on the baja wheel are is it 70 or 75?

Never mind found the answer I needed. Just shopping for my new rubbers.

 

So I need so help on back spacing, if I get 305/70 r16 its a 33 in tire. How much back spacing will I need to clear the brakes?

 

4.5 back spacing....but from what I hear you will rub wheeling with a 305...I was going that route but decided on 285.

 

The 265's are only 30's. the 285's are almost 32's, and the 305 are almost 33 more 32.8. How much rubbing and does the size from 16 to 17s throw it off any? Im going to sleep so we will have to continue this tomorrow night. Thanks for the input. And with the 4.5 bs will any of the tires come close to rubbing w/o spacers?

 

look at how wide 285 vs 305 is...

 

two guys on here I found running 305's...they both said you needed a bit more than 3" lift. One said he was unhappy with all the rubbing....but at the same time there's a few running 35's

 

285/75 is 32.8 inches almost a 33 in tired

 

305 70R 16's here but know one cares about us 1st gens lol