Need this MK1 s/c kit gone Tonite!!!

Welp, heres my once last final chance at me selling this thing before its ebay bound.


-URD MK1 (stage 2ish) Supercharger kit w/75mm pulley (about 8-10psi)



New Price:$2000
+shipping


~~~~If a deal/bid is struck tonite then that buyer will be receiving a brand newish UltraGauge to measure important values for the truck and clear codes n such~~~~~~



FAQ:

What other parts do i need for this to go in?
-button head bracket bolt to clear idler pulley (see page 6 of manual)
-Rotrex Oil

Do i need an X-1?
No, the MK1 had come out before the X-1 was available. For this it has a 7th injector and can be tied into any 1gr-fe ecu (08+ as well)

Does it come with stock pulley?
No, is has the 75mm pulley. The smallest pulley the c30 can handle w/o overspinning it.

Whats the dyno numbers?
unfortunately my truck has never been on a dyno, much less with 'just' the MK1 s/c installed, so i cont have a straight answer, but im sure there are some older thread with the HP/TQ gains of a MK1 system.

How can i make this setup faster?
-Meth
-X-1,Map-Ecu2/3
-Larger s/c (requires larger injectors and an engine mgmt that can handle the larger injectors)
-any/all breather mods help as well


Heres everything layed out,..again"

 

bump!

 

Booooostt

 

So tempting

 

Pm sent

 

PMs replied

 

still avail.

 

come on, i know somebody wants cheap boost.

 

bump

 

welp, heres the ebay listing:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=270785702041#ht_500wt_1124

 

Will it fit an 05 4runner?