Need Supercharger question help quick???

I found a (Trd generation 1 supercharger for 3.4L) and need to know if this will fit an '04 3.4L? If so what is it worth? Thanks

 

I believe it does, the 3.4L is only in the 1st gen Tacos which run from 1995 - 2004

 

Yes it will fit your truck.

 

Okay cool, is $450 worth taking a chance? It is suppose to have everything including hoses and belts.

 

It should be worth it even if it has to be rebuilt. I got mine for $2,700 with the charger and 7th injector kit.

 

7th Injector kit? What is that and is it required? Thanks for the help on this one. Want to buy it for my '04 but hesitant not knowing much about them.

 

It is a piggy back system that makes it run better and most will say it is required and I would recomend it to get the most out of the supercharger. The kit can be found at URD a vendor on here.

 

Sounds like I just bought a supercharger. I will look into the 7th injector. Thanks for the help and I may be looking you up for some more info later.

 

Cool man if I can I'll help. Is it the grey one or black one?

 

It was grey but he painted it black with red TRD.

 

When I go pick it up should there be anything I need to look close at, bearings, shafts, etc?

 

Cool same one I have. Well you would have to take it apart to look at all that and I wouldn't know what to look for. I know if you have any doubts with it call the guys over at High speed lab they can rebuild it for you for around 400-500$ so worst case scenario you are in about $1,000 for a supercharger.

 

Will do and what will this 7th injector run me? Might have to get that overnighted put on this weekend if it isn't to much.

 

It is also aroung $1,000 but IMO worth it.

 

Make sure your CAI (Cold air intake) is compatable with the S/C for starters. some aren't but most are. but you'd rather be certain.

3000$ +tax and install seems a lil high to me, not too bad, but I'm sure you could negotiate that price a little bit

Exhaust is not Required, but it would be useful in order to get the most power out of your upgrade

 

marcel your advice is null since we dont have pics of yours installed

make that build thread!!!!

 

Heres a pic of it sitting on my living room floor..... best I got...

 

lies
All i see is a beer bong tube and an old vacuum

 

You should see the size of my beer bong, 3 stories tall, 3-stage 1.5 horsepower water pumps. Takes 2 kegs to fill it.

The running score is: Bongasaurus 3 kills - Humans 0

 

When you go to look at the S/C, Just be sure the blow off valve is intact and everything. They can be damaged easily on shipping and stuff. Also check for any play in the nose drive. And check to make sure all the bolt holes are intact, they are known for breaking off.

Here a few a sites on basic supercharger knowledge..
http://www.gadgetonline.com/Super.htm
http://www.customtacos.com/forum/showthread.php?t=154201
http://www.ultimateyota.com/index.php?option=com_openwiki&Itemid=60&id=wiki:trd_3.4l_supercharger

You will want to change the oil in it when you get it.

Extra things you will need are the TRD "O" throttle body gasket, OEM check valve, new belt for S/C (might as well replace all the drive belts while you're down there too).. Thats all I can think of.