Huuuzzaaahhh!!! :D

And another one joins the ranks!!

Got my Eibach coils today and my 5150s! Finally said to ECToffroad and just ordered the Eibachs from toyotech on saturday got here pretty quick i think.


Anyways, so now this weekend i shall have the pleasure of install some lovely new parts on my baby

Eibach front coils, Billy 5100s for front
Wheeler 5pk leafs and Billy 5150s on the rear

I have 1.5'' shackles too for the rear..but im not sure i need them anymore..

And a diff drop kit!

Here are the parts

Billys


Eibachs


Shackles and diff drop


And the leafs

 

Oh yeah this will be cool to watch! Nice toys man!

 

Looks like a good setup, can't wait to see it on the truck!

 

Thanks man!!can NOT wait to play with em hehe

 

Make sure you pb blast all the bolts on the suspension and be prepared to have to cut off the front eye bolts on the stock leaf springs

 

Are you doing the coils yourself? I can see that the circlip is on the highest setting right now. Make sure you move them down to the lowest!

 

Alas...i know lol but i will be sure to have grinders on hand!

 

Oh i know! Dont worry i will move it have read way to many times about that. Plus that thread on here just recently...that was scarey lol But yea i think ill just rent a spring compressor..i think..there MIGHT be a shop here that can do it for me...but i think ill be fine doing em myself

 

Cool. Did you get the extended brake line? I did not, but I need to. Be very careful lifting the axle up and down as you install the leafs. I caught myself a couple times maxing out the stock brake line when I was getting tired and frustrated with getting a pin or bolt in. The extension is clearly necessary with this 5-pack.

 

Darn...i new i shouldve gotten that lil fricker...well i get that for sure then on the next go around. Gonna get some spidertraxx too. So might as well get that then too haha plus i trying to sell my motorcycle to get a new bumper from Tim...sheesh..lol

 

SUB!!!!!!

 

I just installed mine and did not need the extension. had more problems with u-bolt than anything else!

 

You are gonna LOVE the new ride!

 

So what does you brake line look like at full droop?

 

Not that bad. while the truck on jack stands i had enough play in the line as not to worry about it. sorry i have no pics. btw i do not do any offroading at all

 

Huh, I did not. With the axle hanging from the leafs, there was zero slack in mine.

 

Nice man its going to look good

 

When i did mine i removed the 3 way block that it was attached too and was able to relace it without any trouble. I probably have got it if i was going to do any offroading but the guy's at wheelers said that i did not need it for my use (i did ask them about it).

 

Congrats!

x2!

I've got the exact same situation, and plan on extended stainless lines when the fundage levels permit.

 

What did all of that run you? I'm leaning in that direction and need to start working on the wife.