What's the height difference from back to front on a stock Taco?

I thought I heard someone say 2" but I'm not sure. Thanks.

 

When I get done out of the shitter, I will measure it for ya!

 

I have 1" of rake after lift

 

I just want to know the difference before any lift.

 

this is the front center of my tire...

 

this is the rear center. hope it helps ya.

 

About an inch and a half I see. Thanks.

 

Roughly 1" of rake.

It looks like more when you measure because the rear fender wells are arched higher than the fronts...they are not the same shape.

Measuring, you should get about 1.75" of difference.

 

Let me ask this. I currently have 884's with 1/4" top plate spacers on the front and 2" AAL in the back. If I took off the spacers and also took off the AAL's, do you think I would be nose high or would it be right at level?

 

No idea, but trucks should have rakes.

 

I have 34'' front and 36.5'' rear measured in the center of the wheel. I do have a bull bar on the front though so that might bring the front down a bit.

 

To many things are going to be different to measure one truck and carry that over to all stock trucks. Age, accessories, times it's carried a load, amount of gas etc..

 

I had 1 1/2" front to back with 3000 miles on a 4x4 double cab short bed before my lift.

 

Mine had a 2" rake with TSB spring pack...

 

US stock trucks = 1 1/2"

Canadian stock trucks , US TSB trucks = 2"

 

potato?

 

You say poe-tae-to

I say poe-ta-toe

Let's call the whole thing off

 

take off your spare and watch your rear rise!!!

 

Not sure why my rear sits so much higher than everyone's. And I don't have the TSB springs.

 

You buy it new or used ?