What have you done to your Tacoma today? 1st Gen Edition

From the right light to the left through the track(since nothing will be sliding through there) and then on the top of the shell towards the front along the rack and down in between the bed and cab to a wire bundle then zip tied to that drilled into the cab(silicone used here for proofing) then down the running board up to the dash through a switch........I know I know a lot of wire but there are no breaks and its tucked out of sight. Still looking to find what wire is the reverse light so I can tap into that at the wire bundle I have it zipped to so I dont have to run wire into the camper.

 

replaced some missing screws on the sun visors. (4) #10 x 3/4" long sheet metal screws. .98 cents well spent.

 

Hauled fish...100 lbs of whitefish,16lbs of walleye and 155lbs of lake trout to my fish market on Lake Huron

today will be 400 lbs...can't wait to get my OME suspension as the stock set up is worn out!

 

Thats awesome! If I were you I would go ahead and get that extra leaf in the dakars....its very needed once you start puttin weight back there. Without it they really sag.

 

I have ordered the CS046R dakars...I think they come with an extra leaf(2nd from bottom) that can be removed for comfort if you wish....I do not plan on removing the extra leaf....

Have I ordered the correct springs?

 

Installed my HIDs last night!!!

 

i did my tail lights

 

i wish my hid's would come in already. well they did but im still waiting for the stinking ballast, they forgot to put it in with the rest of the kit. GAHHH!!!

 

That sucks man.......

 

yea im on the verge of just sending them back and just getting my money back

 

Dont ever order from http://www.hidxenonheadlights.com/

they over charged me and didnt send the high and low ballasts needed and after almost a month they still havent responded back to me either from phone or email..

And the bulbs they have are terrible in design and seem to focus like a pencil for terrible light distribution.

Buy the ones from Slim cubby.

 

You've ordered the correct springs, but you still need the D6XL add-a-leaf. The Dakars on their own do not handle much of a load well. They ride great, but especially since you have a topper, once you start adding weight in the bed you'll be disappointed unless you get the D6XL (it will be the new 3rd leaf from the top when you install it). Even with the AAL the ride is still good, it will add about 3/4" of lift, but more importantly you can actually load stuff in the back without it sagging.

 

done my tail lights

 

Done did those taillights

 

Exactly. Was NOT happy with my dakars until I did the AAL. Now I love them, and the ride didnt get any worse once I installed the AAL.

 

Front windows tinted

 

Nice truck! Looks like your runnin front wheel spacers...why?

 

Think it's just the angle of the pic... Thanks though.

 

got my wheels and tires on and my flares are on but not quite done