What adhesive to use to put on a emblem?

I had two emblems on my truck stolen. The door Toyota tacoma emblem and the SR5 on the back door. So now I had to go on ebay and buy a used one. How the hell do i glue it on the truck?? What adhesive do I use for this?

 

3M Double sided tape

 

Goop works pretty good. Might need to tape it in place and let it sit overnight but once that stuff cures it's on there.

 

This^^^^^^

 

Is that stuff thin enough? I dont want to have a huge gap in between.

 

so double sided tape it is!!

 

well,i think thats what it came with from the factory...stuff works good.

 

Epoxy. Done. It won't EVER come off.

 

+1 this is what you want to use. clean the surface with alcohol to get it nice and clean, apply it firmly(best on a warm day but not necessary), and it will stick pretty damn good. lay it on there and trim off the excessive.

 

3M double sided tape

 

Done thanks for the help

 

Holding tag

 

3M makes several double stick tapes that we call gorilla tape that has a red protection strip on them. The sticky part is totaly clear. Some of them are over 1/8" & their are some 1/16 " & one that is paper thin. That I use.

I see the OCC boys use the same think on their logs.

 

what thinkness of the 3m tape did you use?

 

Dude this thread is a year old.
The red one, that's it. Thin as possible

 

What I used.



After cut out and I used two strips had to trim very little off the bottom and a razor blade on the very edge of the back will make life easy.

 

At least he searched and didn't make a new one.

 

I have that 3M automative tape if you don't want to buy it.LMK.

 

+1 on the double-sided 3M