Suspension question..Will this look wierd??

Okay so right now i have bilstein 5100's in the front set to 2.5" and 5125's in the rear. I want to put a toytec AAL and Eibach springs on. Im running
16x8 pro comps with 4.5 backspacing on 275/65/16 tires.

My question is, should I run a 1.25" spacer up front if I want to go to a 33" tire in the future? and will that look wierd with only front spacers on? I figured the tires will sink in a little bit with the added lift up front.

 

Do you mean wheel spacer, or spring (lift) spacer?

as long as the truck is level, it won't look weird.

 

oops EDIT: Wheel spacer

 

I wouldn't do any modifications like spacers in anticipation of "future" mods. You're needs/wants might change in the future, and that could just end up wasting your money now. If what you have doesn't rub now, leave it alone. The wheel spacer I don't think will allow you to run bigger tires, anyway (you'd need a lift). But yes, I think *that* would look a little weird to have your front wheels spaced out farther than your rear wheels.

 

yes that would look weird if they each an inch and a half further out than the back

i am running 1/4" spacers up front because i have 15x8 procomps and they rubbed the brake caliper and you cant tell just by looking at it.

as others have said i wouldnt do anymore than you have to at the moment

ive also been thinking about moving up to 33's i just dont know if im ready

 

Well 33" tires will be a little wider so i figured a spacer will help with rubbing. But i guess your right im definitly gunna get the tires but idk when.

 

I was actually looking for a 1/4" spacer but i couldnt find any for the 6 on 5.5 bolt pattern. What brand and are they hubcentric?

 

idk i got them from wheelers and they work wonderfully

edit at the bottom

 

thats what i was looking for but idk if itll work with my procomps, i know that the studs were barely long enough to catch as it is.

 

you talking 12.5s or 10.5s?

im mostly worried about the power loss and gas mileage

but also the rubbing. i enjoying wheeling the shit outta my truck so i need them to clear everything at full compression/lock so ill probably chop the cab mounts. i just really dont wanna take the fenders flares off

 

yea same here the fender flares make the truck. i love them! and im not sure what size yet. Plus my mpg already sucks so good point

 

I put on Allpro 1.5'' spacers with only 31x10.5 tires. Made it look TONS better

 

Yeah, I'd get them, it'll prevent frame rub.

That too.