Deleted

Deleted

 

2. I like the painted engine cover I saw on one build looked slick does anyone know what paint manufacture color matches or is close to the silver Toyota uses?

Start with Krylon primer meant for plastics. Then you can coat it with paint from Automotive Touch Up.


6. Has anyone identified the wires you can tap into from the stock inverter to place a plug in the cab?

Here is a link to the writeup I made:
In Cab Outlet Tap

 

As far as I have seen, there is no direct replacement for the stock flaps. If you want to replace them, you're best bet is likely the crappy generic ones you can get at Walmart.

If you decide to trim them, reinforcing them with a metal strip along the bottom edge will be useless. The weak point is the plastic clips that hold the flap to the body panel.