What Have You Done To Your 2nd Gen Tacoma Today?

Did the 30k maintenance today! I was stoked until I found the front diff drain plug washer in the oil when I was done. LOL Will redo the front when my torque wrench comes in.

 

Installed a set of 2011 smoked OEM headlights to replace my 08 set that I have. I also ordered a color matched grill that should be in at the end of next week.

2008 SR5 4X4 DBC

 

Replaced 3 wheel studs and all lug nuts on the front right wheel.

Got a little trigger happy with the impact wrench last time I was working on the truck...

 

I like the setup too. Have the same Cobra in my 2010. I like where you put your external speaker... going to try that location now.

 

Had to thoroughly clean my windshield after having a bat hit it at 45mph.

 

Bought these: ( $20 at O'Reily Auto Parts )



Going to mount them in the bed of the truck so I can get some lighting.

 

Yep, Uniden makes a 2.5" speaker - sounds great! Doesn't obstruct visibility or use of the "oh $hit" handle at this spot. Too bad the speakers in these Cobra handhelds go bad often... not that they sounded great from the get-go. Good luck!

 

Did the AC in the Cab Mod today.. added 2 AC plugs on the back side of the center console.. Worked out well! (I'll see if I can get some pics posted soon..) I ran outta time this aft because the wife and I had dinner plans. I had to get er all put back together before we missed our Date!! lol..

 

Those dumb bats

 

I do like these- I believe they came out with the 09's on the TRD models- I like this idea better then doing the BHLM.

 

wrecked it on friday
http://www.tacomaworld.com/forum/2n...onth-old-2011-dcsb-9-23-11-a.html#post3774812

 

changed my oil today,pennzoil ultra synthetic 5-w30 61,957.i normally put mobil1 5-w30 synthetic,but wally-world wuz out.

 

Have on order some high wattage LED high beam assist lamps that will go on my Westin bull bar. Bi-Xenon kit in route also, along with a projector fog lamp set with 3000 Kelvin HID. Going to be bright going down the trail. I may end up getting a "headache bar" and some front / side / rear off-road lights for it.

 

30K service at 28K... Plugs, greased zerks, was gonna do oil but spent all my time tryin to figure out why my 4WD stopped working after i changed plugs

 

ABS kill switch done.

 

Nice. What switch type did you use? I'm trying to get someone local to help me wire this up. Makes a huge difference on gravel. I haven't had an issue with snow yet.

 

Used a toggle switch I picked up from Orielly's, the mod is really easy to do.

 

I bought them off of craigslist a few days ago since the original owner bought a new 2011 and upgraded soon afterwards. I was more than happy to take them off of his plate. I was looking everywhere for the OEM smoked headlights and like their version over the BHLM.

 

Finished installing my C/F look dash kit:


Installed the Tailgate Reinforcement plate:


And installed LED bed Lighting: