Scangauge II can it read oil pressure??

Can someone tell me if their is a program for the scan gauge II for reading oil pressure on my 06 Tacoma. If so where do you get that program or can someone please tell me it. Thanks

 

I would be surprised if the Tacoma had an oil pressure transducer. More likely, it has a simple switch that it uses to sense whether or not the oil pressure is above or below the minimum point (usually 5-10 psi).

Of course, it wouldn't be the first time I was surprised about something on the Taco, so please correct me if I'm wrong.

 

I don't think so. It doesn't read transmission temps either.

 

No, it doesn't read oil pressure or trans temp.

 

I wish! Maybe someone has the code?

 

No ATF temp or oil pressure scangauge x-gauge for the Tacoma? That's pretty lame.

 

Maybe not at the time but Trans temp is now working on my 06 4.0L V-6 with the following info:

Transmission Fluid Temperature
TXD: 07E021D9
RXF: 032180000000
RXD: 2810
MTH: 00070065FE70
NAM: TFT
In degrees F

 

Anyone else have any luck getting this to work?

I'm not home to try it out.

Shawn

 

Just tried it in my 2009 4.0 V6. Doesn't work. Displays blank/no data.

 

I'll post pics or vid. of it working on my 06 today

 

Have you guys tried calling scanguage recently? That's where I got the info from. I had tried several online and was always blank. I called and gave him my info. Working like a charm. It's on 7:00am here in Cali I''ll take a quick Vid on my way into work in my 06 4.0l

 

As promised trust it if you wish.

http://www.youtube.com/watch?v=HnZyy4o97BE

 

Thanks for taking the time to post the video.
I'm flying home tonight, and will give it a try on my 08. I'll have to look up how to enter the "X gauges" again as it been a couple of years. I'll post the results.


Now if only you could tell me how to get it to post in deg C!

Shawn

 

Thanks for the video. Unfortunately this code is not working for my 2011.

 

Will try on my '07 in when i finish work and will update. I will be a happy little school girl if it does work

 

Just tried it on my 2008 and unfortunately it doesn't work!​

 

I'm here where are you?


So far I have heard 08, 09 and 10 doesn't work. Still waiting to here from the older guys as to what the cut-off was.

 

I just got home from Kansas City, I'll give it a try on my 08 just to double check.

Shawn

Just tried it on my 08, no luck either.......

 

2nd video after the truck was normal operating temp. I found city streets I'm in the 140's, After freeway driving I got off and got it up to 180's today. Here's a city drive at night. Showing water temp, intake air temp, trans temp, and voltage.

http://www.youtube.com/watch?v=pTRfLcGJM7s

 

Not working on my '07, double checked codes.