Toytec Billys with Coil-Over 1st Gen

Any of you guys have the $699 billys coil over shocks 0-3.5 lift from toytec? If you do what tire size did you go and what else did you need to accomadate 'em and if you can send pics. Since i am getting a good cash lump from Uncle Sam i am getting this done on my taco. thanks in advance. Not hating of 2nd gen but 1st gen users only.

 

And yes, should have a couple members chiming in. You will enjoy those.

 

Actually Im ganna be orderiing my Coilovers tomarrow. Cant wait! It's a great choice and I reccomend it. Im basically am upgrading from a spacer lift and I need new shocks anyways... But If you plan going over 2.5" then I would get a diff drop kit. Im also getting Total Chaos UCA's bc of allignment issues when going with a 3" lift, its not recomended, but I like things with in specs.

 

i was already planning on those two addition parts, just didnt know if i would also need a longer brake line, what tires are you going to run?

 

what are you doing with your spacers???

 

Im running 285/75/r16 with slight trimming. you shouldnt need a new/longer brake line.

And Im ganna be keeping my strut assembly with spacer, (just incase)

 

let me know if you want to get rid of them

 

K.. will do!

 

what kind of spacer do you have. Are those tires 4 backspacing or 4.5. what kind of trimming besides the pinch weld did you do? sorry for all the Q's.

 

there Revtek spacers, and my wheels are a 4.25 bs, I just had to trim some plastic on the front bumper, you cant even tell that I trimed any.