What Have You Done To Your 2nd Gen Tacoma Today?

Here is my Audio install -
ipod interface
2 JL 10" subs (stealthbox)
2 arc audio mini amps
ipod interface (ran through stock deck)
aux installed (ran through stock deck)
arc audio tweets and 6.5" speakers in front and rear

here are some pics--

2 chords coming out of the center consul.. one is AUX, the other is ipod interface that chargers as well. (plugged into iphone while taking pic haha)





Set up:
-2 mini arc audio amps
- 500 watt only set to 300 for the stealth box
- other amp powering speakers in the truck

 

Put my 5100s on the front, with my Gusseted spindles and TotalChaos A arms. Only set it to 1.75 really wanted to set them to 2.5 but I didn't trust my spring compresser.

 

Leveling kit from Daystar.









I know the front end sits a little high but the spacers will settle a little. The spacers work great. No noise or vibrations, plus its not for hard wheeling so it works great for me!

 

ok lets try this picture thimg again....

 

Yesterday:

-Installed and mounted ScanGauge
-Installed Cobra Radar Detector ( waiting for hardwire kit to come in to wire it up clean )
-washed my digital fit liners



Mounted to this:


with this:


to end up with:

 

Did some wheeling. Had to turn around on a narrow path. Put some scratches on rear bumper. Sprayed with some black rustoleum.

 

Put my swaybar back on...
Just too much body roll, but I did love! the ride without it... Soo much smoother.

 

finished up my Aux. lights install...

 

Innovative. I like it.

 

Took her for a few drives today with the Mrs. Washed the truck. Then ordered the new bull bar/light bar. Tomorrow, l am looking forward to tuning the whips.

 

picked er up from the body shop
had this repaired
http://www.tacomaworld.com/forum/2n...ecked-my-6-month-old-2011-dcsb-9-23-11-a.html

 

Light up the night!! I will be doing this to mine in the next couple of weeks too! How did you mount the lights? Do you have another thread on this?

 

New cabin overhead light, Man the LEDs are bright!

 

Just finished this bad boy to keep in the truck.

 

Nice work there.

 

Found directions on this page. I used a nice Monster Yellow RCA that I cut one end off. Jacket of the RCA goes to black and the middle of the RCA to the red wire. I also soldered the RCA leads to the wire. Stripped back a little of the insulation back from the connector.


http://www.tacomaworld.com/forum/audio-video/30889-oem-camera-connection-below-dash.html

 

Thanks.

 

Nice! I want one of those!

 

Thanks Now I just need a tow strap or chain. lol

 

Yesterday I did the rear diff breather mod. I don't know why I hadn't done this sooner, it was really quick and easy. I followed this install thread, +1 to Neubs for making it so simple.