OME/Bilstein setup Question

I want a 2 inch lift all the way around, so far I have bought the 5100s. this is the setup I want:

- Bilstein 5100 front/rear
- OME 884 Coils
- Toytec AAl (non TSB)

According to Toytec:

Any thoughts?

 

The 5100s are a digressive valved shock whereas the OME's are progressive and that's prob what they are talking about. The eibachs are prob a better choice with that valving! At the .85 clip and eibachs you should be around 2.5"??

 

excellent, TY

 

One more question:

These are the parts that I will have in 2 weeks:


- Bilstein 5100 front/rear
- Eibech Coils
- Toytec AAl (non TSB)

What else do I need? I will be going 2.5 all the way around.

 

you and i are on the same boat same questions and everything

 

Diff drop kit? lol

 

im getting the same setup

- Bilstein 5100 front/rear
- Eibech Coils
- Toytec AAl
and what is non tsb mean?

 

Non TSB is a 2" AAL kit. TSB AAL will give you an 1.5". I'm hoping to get the same setup once I stop being so damn indecisive.....

 

If your truck has a 3 leaf pack you DO NOT have the TSB...if it has 4 than you do!...TSB Trucks = 1.5" AAL....No TSB = 2" AAL

 

no

 

also a thing worth noting make sure you get the right rears i got the ones for 1.5" of lift and i needed the ones for 3-4" lift

 

i got the rar tsb and ome 885's up front on 5100's and i am 1 inch high in the back

 

Hmmm, I thought I did because Toytec sells them with their 5100 kit

 

They sell them but you shouldn't need them with that sized lift. It's used to keep your cv's at a good angle. You'll also need the 1/4" spacer on the drivers side for the taco lean!