How do I stop the beeps when I lock or unlock my Taco?

My buddy and I clipped the wire to his buzzer on his 03. No problems so far but it was on the older model.

 

I just took my Taco to my buddy that owns an Audio store to get the Valentine1 and TomTom hardwired...he advised me not to cut the wire to the piezo buzzer. He said they'll have more than one thing running in a wire sometimes and when the stealership connects a computer to it it will show up therefore voiding part of my warranty.

Those are good points so I don't think I'll cut the wire. I guess I'll wait until the next time I'm at the stealership and pay them $90 to do it.

 

Step one: Open the drivers door and insert the key into the ignition

step two: Remove the key from the ignition and, within 5 seconds,
reinsert the key back into the ignition and switch to the on position.

Step three: After 10 seconds, the system enters the answer-back mode

step four: Within 10 of the answer-back beep the switching mode is
started, press the remote twice and teh system will turn off
or on based upon which the system is set.

 

Did this work on your 05? How do you know it will work on our 09's????

Thanks for the help!

 

That solution got posted before in this thread, but never confirmed. I'll give it a shot this evening.

 

How did you find that thread...I've been looking for something like this all day.

 

Googled 'answer-back mode Tacoma' after I saw blackenedtaco's post. It didn't come up when I searched here earlier because none of the keywords I thought of were in that other post.

 

jmed99 and I could not get it to work for the life of me. If you can please let me know
Thanks!

 

Thank you, Blackened Taco! This works like a charm. And yes I have an 09'

Someone should start a post listing all the tweaks that can be done like this one! That is if there isn't one already and if so this one should be added.

Again, thank you!

 

This works!!!! My beeping has stopped! Do this...

Last Modified: 5-14-20085.1 DFrom: 200805Model Year: 2009Model: TacomaDoc ID: RM000000XXC01SXTitle: DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: CUSTOMIZE PARAMETERS (2009 Tacoma)
CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION

The following items can be customized.



NOTICE:

• When the customer requests a change in a function, first make sure that the function can be customized.
• Record the current settings before customizing.
• When troubleshooting a function, first make sure that the function is set to the default setting.
• If the battery is disconnected, the wireless answer-back buzzer will be returned to the default setting.

Item
Function
Default Setting
Customized Setting
Wireless remote control
Operation signal (Buzzer)
ON
OFF

(a) Open the driver side door and insert the key into the ignition cylinder.
(b) Remove the key from the ignition cylinder and, within 5 seconds, reinsert the key and turn the ignition switch to ON.
(c) After 10 seconds, the system enters answer-back buzzer switching mode.
(d) Within 10 seconds after answer-back buzzer switching mode is started, if a transmitter button (the same button) is pressed twice, the answer-back buzzer setting changes (off to on, or on to off) to activate or disable answer-back by buzzer.



HINT:

• The driver side door is closed.
• The ignition switch is turned off.
• The key is removed from the ignition cylinder.
• A transmitter button is not pressed for 10 seconds after answer-back switching mode is started.
• The transmitter is operated but the second button pressed is different from the first.
• Answer-back starts.

Thanks to beeftaco!!!

 

Awesome. Can't wait to get off work to try this. And if I don't like it, I can disconnect the battery and get my beeps back. Beats cutting wires.

 

I must be lame! I glad to see that it works. I will try again until I get this sucker quiet.

 

If you do not like it just do the same thing and it will reverse the previous function. You can turn it on or off by using the directions.

 

Thanks BT and jmed99, the beeping WAS annoying, it's fixed now.

 

Hell yeah. Worked great, first time. No more annoying beeps.

 

I also have the procedure to kill the seatbelt buzzers also if you want that too just let me know.

 

Of all the advise that I have gotten off this forum, this is by far the best.

Thank God, no more beeps.

I just can't believe that Toyota wanted to change someone on here 80 bucks just to turn it off. What a friggin ripoff.

 

I'd like to know. Any ideas about the open door/ keys in the ignition alarm?

 

I finally got it to work, I had the stupid door closed and it would not work! Thanks guys.

 

some times i wish mine would beep so i didnt have to look for the lights to turn on. not a big concern though