Quotes I got today

I got 2 quotes today on 2 different lifts. The first one was for a 3" ProComp Coil Spring kit for $467.99 and $552.50 to install it. The second is for a 3" OME. It does not come as a kit but was a total of $1102.88 and then $637.50 for install. Are these good prices? Should I stay away from ProComp?

 

They are both decent manufacturers but I think the OME might be a more complete package then again I don't know what the kit components are.

And then there is the almighty search....

 

What are all the items that come with the OME lift? If it comes with the Dakar rear leaf packs thats a good price, if your not getting the Dakar leaf packs then your can get the OME kit much cheaper.

 

I would install it yourself OP to save money... They're not that hard to install and I'm sure local members would assist you.

 

OME does come as a kit... and those install prices are crazy. I suggest you look around.

 

Shop rate is normally about 90-130$ and HR. OME kit is going to take at least three-four hours for one tech to install plus an alignment for another $70-80. Sounds like the install prices are about right.

 

Install rate isn't that crazy

 

Yeah now that I think about it your both right. Never had anyone I know have a shop isntall their lift, always been a group thing so I didn't think It would be that high.

 

yeahh any price looks high as hell when you can either install yourself or have some buddies help you for FREE ahah.

 

I can't really recommend the ProComp unless you're putting on a really heavy bumper and winch combo - it's got crazy stiff springs.

If you want to save a buck, you can get Add-A-Leaf instead of Leaf pack in the rear.

If you want to save another buck, you can get bilstein springs and eibach springs with an add-a-leaf in the back from ToyTec for around 600 for parts.

 

Thanks for all the input everyone!! But, after finally finding a 4-5" suspension that I have been looking for I am going to go with this one. Even though the price is quite a bit higher, this is what I want and am willing to pay the extra money to get exactly what I want.

RCD 4"-5" 05+ Tacoma Lift: 1799.00
Heavy Duty Front Sway Bar Drop Down BracketsCustom Matched Bilstein 5100 Series Monotube Gas Pressure Rear Shocks

CNC Machined Replacement Cast Iron Steering Knuckles for Precise Steering Geometry ​

Heavy Duty Two Piece Lower Sub-Frame Assembly and Polished Stainless Steel "Twin -Link" Anti-Compression Struts Insure Structural Strength and Durability Heavy Duty differential Skid Plate that Intergrates the Cross Members and adds additional protection RCD "Gator Black" Polyurethane Powder Coat Finish for Lasting Good LooksGrade 8 Hardware for ReliabilityFront & Rear Brake Line Brackets​

 

Why not go with spindles since you're a prerunner?

 

Camburg spindles FTW

 

I have talked to a few people and they said they had trouble being able to align the truck after spindles were installed.

 

Do you have to cut the frame on the prerunners for the RCD lift ?

 

no idea

 

Forget the RCD.....after reading a post that was just put up about suspension and me being able to finally understand it (i think) I have changed everything to the following. It is all OME....let me know if this looks like a good set-up.

Shopping Cart

1 x
$179.99

1 x
$314.99

2 x
$399.98

1 x
$8.99

1 x
$169.99

Select coil: 885 Med coils
Options: No top plate spacers 6 Products
$1 020.24

 

Its a good thing I can make everyday life decisions better than this.......