Wiring tow harness on a first gen.

So my trailer wires don't work anymore. I was wondering where to find the wiring diagram. I checked the towing bible and the link didn't work.

 

its a pain in the dick if i recall correctly. its a 5 wire system, and you will need a special plug or a converter.

If i recall toyota had a recall on the wiring harness though as there was an issue.

On mine, the same wire controlled the brakes/driver side blinker, then theres passenger blinker, ground, and driving lights. Forget the order and colours though. might try the fcm on ncttora.

 

yup I got the converter. I'll go check TTORA

 

yuppers. the converter should say on it what wire, then you can simply go get the wire/run your own from the source. I do remember though like i said that the brake/driver turn are on the same which is a bear if you attempt to wire a 4 pin like i did. so i chose no driver side turn, as i wanted break lights.

 

Which fuse does the tow wiring harness run on?