LED light bar

Trying to wire the reverse lights. gives me a posi wire to run the the reverse lights but where do I run it to?

 

I'm no electrician but I think we'll need some more information.

Are you wiring these to a relay? Are they going to be able to be powered anytime, or only when the truck is in reverse? Does it have a harness with it? Pics?

Fink

 

take the two 10mm bolts out of the side of the tailight
pull the tail light off
where the bulb for the reverse light is there are two wires, one red and black and one white.
tap into the red and black wire
check to make sure it lights up. :thumsbup:

 

I took all the bolts off the side but it still seems like its held on by something?

 

I think he has this handled...I'll just sit back and read.

Fink

 

there are two 10mm bolts, one on top and one on the bottom. once there out its held in with two clips, just lightly tug and they will let go.

 

I just need to know how to take the tailight off. I took the bolt that he said to take off off but its still being held on by something

 

That's the easy part for me.

After the two bolts are out, just pull on them gently and they should end up popping out with a little negotiating.

Fink

 

this\/

and this \/

 

Okay i got it out and i found the wire. Am I supposed to splice or how should I go connected this rascal?