ABS wires???

Broke mine when I was doin my lift. No LSD now and my ABS light is on. Can't be inspected with the light on so I hafta fix em ASAP. Cheapest place to buy em? Local dealership quoted me $60 and $72.

 

i had the same problem on mine once the harness is very easy to repair, unplug it from under the hood and take out the 2-4 bolts holding the harness in and unplug from the brake sensor this whole process takes about 5 min including taking the wheel off. when you have it off you can cut off the ruber tube over the wires just make sure you have a long piece of heat shrink tube to put back over it when i got mine apart i soldered the very small broker wires back together and covered the entire harness with heat shrink tube it took about 30 min and cost about a dollar.

 

Thanks

 

So there are 2 small wires in each harness? And are these wires covered with a coating inside the tubing?

 

yes

two insulated wires inside the outer tubing. really easy to fix.

its easy to find the break because the tube is usually skinny where the break is

 

i unplugged mine to disable the damn ABS

 

matt i check rock auto and i couldnt find anything for new ones, but if you call them they might have them and give you a price. also if you wanna fix them let me know, we can take them off and solder them back together with some shrink wrap at the garage.
another place i found
http://www.onlinetoyotaparts.com/seccat/tacoma-1374/2009/abs-sensor-wire--61531/19/61531/

 

Id like to disable mine but my LSD runs off the wheel speed sensors

 

Got it fixed. One wire broken on the drivers side. Ill ordedr a whole new wire sometime soon. Just had to fix it for inspection

 

yea, i know. but i installed a locker...

 

That's comin too

 

lies!