New !!! 20s black hoss's

I have a set of black hoss's for 6 lug tacoma offset 4.5 .. Need sell .. I'm tired of looking at them... If you need pics here my email kanonball92@yahoo.com 800 ship to your door......

 

Nevermind just posted pics ...

 

These are the exact ones I have been wanting... If you still have them in a few weeks I might have to pick them up from you.

 

pm me what you want if I come to your door and get them

-D

 

I was doing same lift as hb .. Funny u say that .. I had the rcd lift and sold that already then personal things came up so now am selling everything brand new ...

 

If any of u live near pa or in pa I'm willing meet halfway ....

 

TTt

 

is lifting it mandatory?

 

how much picked up?

 

hahaha literally hung up the phone with them about those exact tires, He said I had to run 285/50/20 though.

See you sunday K1992f!!!!

 

ugh he said it would not rub on truck, exact words were that was ideal size for the rim. with no rubbing with my package.

 

Sold ....

 

This is a moot point now for this case since the wheels are sold, but in the interest of future discussions I'll post it anyway. A 285/50/20 on a 9" wheel will NOT necessarily rub like hell, and on the right 9" wheel will actually not rub at all. On this particular 9" wheel with 4.5" BS (-12), it might rub some on the flap and possibly slightly on the bumper but I would be surprised if it did hit the bumper.

I ran 285/60/18's (which are bigger than 285/50/20's) on 9" wheels with 0 offset on stock suspension and had only slight rubbing on the flaps and no rubbing on the bumper. After I removed the flaps I never rubbed anywhere, even at full flex off-road.

 

Fixed my post. I meant 285/50 as that is what was being discussed. My 285/55 was a typo.

 

This sums up what I was going to write. The 285 width isn't a big issue. The problem arises with the 33" hight (which many 285's are). The 285/60/18 and the 285/50/20 are only 32's.

 

i've searching lugs and cant find any info on what ones i need to get. Can anyone point me in the right direction?

 

You'll want conical-seat (acorn) lugs, 12 x 1.5 thread and pitch

 

you da man!! +1

these should work correct?

http://www.jegs.com/i/McGard/671/64002/10002/-1?parentProductId=753340