New HP numbers for the n/a 2nd gens

Cant remember your mods, but how bout a quick update.

 

urd tcai, DTLT, custom exhaust setup, and apr x1

 

And thats at the wheels right?

 

yes sir

 

Can you explain the mods, I just got to the forums and can't decode all the abbreviations yet.. URD I think is some programming thing , right? and I have never heard of DTLT!? or Arp x1?

sorry for the newb questions

 

No Probs:

DTLT's= Doug Thorley long Tube Headers
URD TCAI= URD (Underdog Racing Dev.) True Cold Air Intake
APR X-1= Allan Phillips Racing piggyback Eng Control Module w/Exhaust Cam Gears and Thermostat.

Here are the links:

http://www.urdusa.com/product_info.php?cPath=93_120&products_id=1260518539

http://www.urdusa.com/product_info.php?cPath=151_164&products_id=1260518504

http://www.aprpower.com/indexX1.html

 

thanks!

 

one of my many, yes

 

Damn those are great numbers! How much did that cost to do though?

 

to get those numbers? or to run it on the dyno?

 

DynoJet = cheater!

Go dyno on a DynoDynamics get real dyno numbers then sit in self pity like I do.

 

is that like a 45 hp increase from stock? Is most of that hp from the x-1? I'm thinking headers and the intake is good for 15 -20 at the most?

 

The avg stock pull is anywhere from 190-200rwhp.

Prior to the X-1 Jax dyno'd 241/266 that was with i/h/e and a tune with the URD Maf Cal.

So the X-1 stage I kit netted an additional 12hp/32tq on a prev tuned truck. You can't get much better then that.

 

yea, what he said.

 

Got my kit in the mail yesterday. Installed the Exh gears today. Hooolyshiit.

Longest install for me ever Almost thought I would never get that damn cam bolt out. None the less all went well. And I now have 6 properly gapped Denso's, rather than 1/2 NKG that were all gapped between .043-.045; go figure

Wanna thank Xrunnit for info PM'ed

And thank you jaxchrisfla: this thread gave me some motivation to deal with one hell of an install.

Will let you know how it feels when I get Done with the ECU tomorrow.

Laters.

 

ahh man, you should have done the ecu tonight as well. it takes less than an hour, unless you are going to mount the usb hub in the console.

congrats man. the gear installed kicked my butt for hours. Let me know if you need any help with the rest of the install.

 

Don't want to jack the thread but I ordered a URD MAF Cal. Are there any tips anyone can offer for installing it. I'm new to all of this.

 

I'll pm ya.