Fitment question on KMC Enduro (machined finish)

Wondering if someone could help me out. Since they have been discontinued, I'm looking at purchasing a set of the machined KMC Enduro XD122 before they are no longer available online. I've done some searching on the board but have only found fitment threads on the black version thus far, which have a different offset than these.

My question is whether the following size would pose any rubbing/fitment issues on my stock 2012 TRD:

• Size: 17" x 9"
• Bolt Pattern US: 6X5.5
• Offset Mm: 0
• Back Spacing In: 5.00

I am planning on running 265/70/17 Duratracs with them, and eventually maybe a 2" lift with 275/70/17.

Appreciate any help!

 

The wheels specs look good except for the width. Duractracs are not approved for use on 9" wide rims in their 265/70/17 size as per the Goodyear website.

 

I have those wheels. With 265/70 Michelins I had some light rubbing even after some significant plastic trimming and a 1.5" lift. Now I have 285/70 Duratracs with a 3" lift and I had to do a cab mount chop to get it it to not rub. I like the wheels but it's so wide and offset that it was quite a bit to make them work.

 

Thanks for the info guys. Right now it's Looking like this might turn into a real labor of love though. Across the country I can only seem to locate 3 of these wheels.

 

Not mine but I found this on other forum,

new KMC real bead lock race wheels. 17x8.5 for 6 ON 5.5 lug pattern, back spacing is 4.5. Fits silverado, toyota, Nissan, etc
brand new never mounted still in boxes. $1400 obo buy them now and dont wait for 3 weeks from anywhere else. call text or email 619 520 5273 pmercado3@hotmail.com

 

Yes I believe they are discontinued.

 

Thanks for the tip, but can't use the beadlocks. Don't think they are DOT approved...