tire size w/ just coilovers & all pro bumper

Hey guys...I have an 07 tacoma prerunner with some Donahue racing coilovers and total chaos UCR's. I'm looking to get an all pro front and rear bumper and wanted to know recommendations on tire size for this set up. I'm also getting some squeaking coming from my front suspension when I go over bumps in the road...do i just need to grease up my a arms. I don't get this sound when it rains.

 

What is the total amount of lift you're getting out of the coilovers? Do you have any rear suspension modifications? TSB leafs, AAL, etc...?

Fink

 

3 in the front no rear mods

 

i had a 3" lift with the All Pro front bumper for almost 2 months. i was running 265/75/16's at the time and had plenty of clearance and no rubbing. and i bet i couldve had 33's with out any rubbing.

lets say theoretically you have 33' tires and it rubs..it's going to rub on the body mounts while turning at full lock. there's a mod for that, easy to do but requires cutting a portion of the body mount and welding some metal to re-box the body mount. somewhere here there is a good "how to" on the body mount mod.

 

Now I'm confused. You have a 3" lift up front with a completely stock rear?

Fink

 

Bro lean... but yea 33's should fit perfectly up there.

 

No kidding.

If it were me...I'd fix the lean before putting money into tires. If you are just dying for some tires, then I agree that 33's would fit just fine.

Fink

 

Thanks guys. Think I'll run 33's as I'm lookin to get some 4" camburg spindles and fenders for the front, deaver springs for the rear along with some bilstein shocks. Do you guys recommend changing my gear ratio to 4.56? Is it really a big difference in torque and mpg.

 

Dont need to regear till you slap on 35's