What have you done to your Tacoma today? 1st Gen Edition

would love to see pics of the red leds.

paid to have my light racing uca's installed today.
did the rest of the icon setup myself, but i had trouble with the ball joints so paid the professionals.

it took them 3.5 hours and it cost me almost $800.00
i feel like i got robbed...

 

Maybe you guys could help me out here:

http://www.tacomaworld.com/forum/technical-chat/192984-gear-indicator-lamp-issues.html

 

Only poor ones. The radio is actually on. My point and shoot camera has a tough time "seeing" the orange of the radio against the red of the heater control. The difference in color is best seen by comparing it to the clock in the photos. It looks a bit better in person...really

Autoillumination.com

http://autolumination.com/74.htm

Scroll Down a bit on that page to get to Neo Wedge Based LED Bulbs

NeoWedge Type B (T4) Dual HiPowered LED 10MM Red $3.99 Each

Look for this:

Crappy photos posted above

 

thanks for the link

 

I would have happily bought two!

Still, doesn't matter, got suspension.

 

Through some Christmas spirit on the bumper!

 

Priced out some KM2's for the summer

What do you guys think: 33X10.5, 32X11.5, or 33X12.5?



..oh ya and changed the oil

 

33 10.5 IMO

but with any KM2 you cant go wrong

 

Had my new BFG AT KO 285/75/16's mounted on Ultra Drifter wheels....only I need to install my new lift to mount the tires!!! Damn Christmas vacation can't get here fast enough!

 

Got the CB tuned and peaked. Might mount a firestik on the front bumper or do a fender mount.

 

front bumper mount would be cool....

 

x2 go with the 10.50s

 

Thats what ive been thinking. I know its going to be alot easier on my mpg's and power. Any other particular reason why?

 

mainly cause of the MPGs.

I like the look of wider tires, but it's not worth the gas IMO

 

There's also less rubbing with the 10.50s

After a single afternoon of wheeling, the 12.50s with 4" BS...

 

Haha! Did you take a picture of my frame there

Yeah my old 285's with 4.5 bs did the exact same thing. Good thing i asked cause my new 15" steelies have 4" bs, so that wouldnt have worked.

 

Yeah I ended up adding 1" spacers so it wouldn't rub the frame but it in turn rubbed the pinch weld area worse. Gonna tub the firewall next...

 

FWIW

I had an 18" blade lying around and I put it on my passenger side.

Here's pic looking down the passenger side molding. You can clearly see there's is plenty of room between the actual blade and molding and the tip of the wiper is not only short of touching the molding but it is also (hard to see in this pic) elevated about the molding.

So in short: 18" wiper on the driver side still has plenty of room.

 

Took The Valence off since i cracked mine, Moved turn signals to the side markers, and Used some Rustoleum Roll On Bed Liner on my Skidplate.