San Antonio

Good but the autox's are done until next year. I might give them a good test friday at SAR.

 

Nick you get those fogs on that I gave you? Or thought of any ideas on how to use them?

 

Yeah man I still have them I'm still trying to think where to mount them and how to do it, I'm not to knowledgable with wiring lights up,

 

Well if anyone wants to do any more mods I'll be off the 26th, so weather permitting we can play a little more slap and tickle

 

I'm in for a mod day...finally got a day off too!
not too sure about the

 

I've been working on cleaning up the garage a bit making more room for whatever needs to be done. Anybody got anything they need to do?

 

I finally got the last part to my lift.... it's a lot of work to do and to ask of y'all here though

 

What left do you have to do?

 

what were you doing again?

 

Everything.... Spindles, 5100s and new coils, brake lines (R&R), rear shocks and leafs.
Been too busy with work to even start

 

yep thats alot of work right there, would take up the whole day, so your going with the spindles and 5100's with 885's? and what leafs did you get?

 

That's what i figured, i was debating on going to "off-road concpets" to get the work done. 5100s with eibachs since toytec had such a great deal going on. ended up getting All-pro Expos since the front will be ~5.5" lift

 

Did you get a leaf pack or aal?

 

Sounds like it would be fun to do, i've seen/done it all before especially the front. I'm not sure I would have all the tools for the job, breaker bar, large sockets, enough jackstands, torque wrench, etc.etc.etc. It's not impossible and can be done fairly quickly with the right tools and hands on the yob. I know someone who has such tools but not sure if he would be available

 

Full leaf pack

it would be fun and i would do it by myself if i could but i don't have half the tools that would be needed. You're right though, with enough hands it would be a breeze and that's why i wanted to see if anyone wanted to lend a hand/day I'll have to look into what tools are needed and see what i've got or can borrow. just concerned since my suspension is stock from 2005, it's going to suck to take apart.

 

Eh, some PB Blaster or WD and some busted knuckles and everything should come off

 

This times about 562, give or take about 15 minutes. Ask me how I know

 

How you know?

 

x562

 

Cuz I've taken the entire front suspension apart on a 6 year old, 2005, Tacoma that lives on the Coast. Let's just say I need to buy stock in WD-40 and PB Blaster