do you have to lift the back with the front?

hey guys im kinda new to all this but i had a question do you have to lift the back of your tacoma if you lift the front i wanna get the bilstein 5100s for my tacoma but not sure if i have to lift the back also

 

If you set the 5100's to 0 or 0.85 you will be alright with no rear lift. Any higher than that and youll have some bro lean with no rear lift.

 

It depends. I had the 5100 set at 1.75 and I was level. Maybe half inch higher in the rear.

Now I got 885s with my 5100 set at .85 and one inch rear block in rear and again I'm level.

Best thing I could tell you is measure the front and rear then make your discision.

 

If u are asking if it is required to lift the back if u lift the front then no.

It is only for looks. Most people don't like the bro lean or rake by just lifting the front.

 

thanks also what is the cheapest way to lift the back?

 

Well the block and aal are about the same in price from Toytec.

 

Blocks are cheap. But I would stay away from them.

Most people on a budget would go with an Add-a-leaf (AAL). They are around 80-100 bucks.

 

http://www.tacomaworld.com/forum/suspension/11282-tacoma-lift-faq-guide-read-12.html#post3984628

read up OP

 

cool thanks guys for your help im new to this whole tacoma world thing but i think im gonna like.....

 

Its a great site, good people and great knowledge. I learned a bundh and still learning