Need help with 2006 bucket seats install in a 2010?

Alright guys I need your help. I and another member on here are going to swap seats. I have a 2010 regular cab with airbag bench seats and he has a 2006 non airbag with buckets. I know for him on his 2006 its just simple install and go, but for me on the 2010 I need to trick the air bag and do some other stuff.

From my understanding I need to run a 3.3 ohms resister in the yellow cord under the seat so that the air bag light will not come on right?

Other question is there a way to take the airbag system off the 2010 bench seat and install on the 2006 non air bag seats, instead of running the 3.3 ohms resister. Also is there anything else I have missed that I need to do?

I searched and read all the seat swaps post but still have question. Thanks

 

Anyone have any info on this thanks

 

BUMP

 

BUMP

 

Good luck.

Hope all goes well with this conversion. If those bags deploy, that will be a bad situation....

 

Thanks