b arb bumper on access cab pics

lol

 

Need pics and price before the thread gets locked.

 

eibach coils are 1.6"

 

OP , search for Eibach pics or post a thread in 2nd gen looking for anyone running an ARB bumper on Eibachs

 

Wow did you read any of this

 

Joke

 

:woooosh:


thats the sound of it going over your head

 

Ship to TX?

 

Didn't see the sarcasm llama my bad lol

 

can i fit 35's with this bumper and 1.5999" lift?

 

Absolutely! But my only question is should I lift MY truck 20" and will I need those awesome blinged out chrome nerf bars to get in the cab? And where is the cheapest place to buy all of this crap???? lol

 

so what do you guys recommend seriously i do not wanna raise the truck higher than stock. I'm not trying to be sarcastic and i really dont appriciate the smart ass comments but i would like somebody to honestly answer me. I am sure there are some of you that have a arb without a freakin lift

 

the stock front suspension cannot handle the weight of the ARB or most steel bumpers for that matter. its gonna sag and ride like ass. The OME 886 springs are made specifically for the ARB, but they add 3" of lift which you dont wont. The Eibachs sold by toytec have a spring rate 10lbs less than the 886s and give less than 2" of lift. that will probably be your best bet. or you can look at the toytec coilovers, which are bilstein 5100 shocks and eibach coils, and they are adjustable 0-3" i believe.

 

Your best bet is the Eibachs paired with some Bilstein 5100 shocks . The Eibachs have a higher spring rate than the stock coils which will help carry the weight of the ARB bumper , however they are not specifically designed to carry that much weight , so they will most likely sag .

The Eibachs only provide 1.6" of lift over stock , factor in a bit of sag and you will probably be as close to stock height as you can go with the ARB .

 

hey thanks oz t and ga tacoma for some honest answers. I really appricate you guys bein honest and not being a smart ass. I really appriciate it guys

 

Why is this thread in the B/S/T ?

 

check out other bumpers besides the ARB? they are one of the heavier aftermarket bumpers...

if you're worried about too much sag with the before mentioned suspension setups to keep close to stock ride height, you maybe better off with one of the other 2nd gen taco bumper fabricators that you can find in TW...

 

This is my truck with stock coils and 5100s at 1.75". You can definitely feel that the bumper is on there but I think the springs handle it well. Of course I do not yet have a winch on there. I fucking love my truck!

 

Agreed

Look into aluminium options such as the Relentless Fab

 

so cheehab what would you do different if you where to redo it? Would u put ome 886's on it? or would u leave it like it is?