Alabama thread!

should be. still dont think they have hammered out a def date though.

if you go back a couple pages ive got some pics up or just look at my build page.

 

x2 on the OME's too. Justin copied me

 

here we go again.... everyone trying to take cred for my truck.... first paul will say he told me what susp to get then brian will say he told me what color to get and then xoduece will say he told me what cab and bed length to get...... geez im just not a self thinker evidently....HA!!!!!!!!!!!!

 

I also told Justin to get married. I figured it could keep from giving out candy to little kids. Poor guy can't make a decision on his own.

 

wait wait wait...... i think you are getting me confused with kyle now. he is the one that gives out candy not me. ive personally never met chris hansen.

 

hey justin, how are your cv angles?

 

lol



WAFB- Ch. 9- BREAKING NEWS! New
Orleans (AP)- In the lead up to the BCS
national championship game on January 9,
University of Alabama football practice was
suspended for two (2) hours today when a
... player discovered a white substance on the
field. Alabama coach Nick Saban called law
enforcement to investigate the matter. After
a scientific analysis, experts determined that
the unknown substance was the goal line.
Practice resumed after law enforcement
agents determined the team was unlikely to
come in contact with it again.

 

Hilarious!!!! Cuz Les Miles had to do the same thing

 

lol

 

lol i just seen that on my facebook and had to share it with yall. I cant wait, its gonna be a damn good game.

 

they are still there, thanks for asking



























































































as far as i can tell they are still quite good. brian seemed to think they were as well when i had him take a look.

 

I've got the same setup: 885's, OME shocks, LR UCA's, on a DCSB 4x4, and my angles look fine as well. They're increased, but it's not bad.

 

I was asking cause my lca's have a pretty steep angle. I was wondering if. I was going to have problems once I got a 4wd

 

I think the extra weight of the axles / diff / drive shaft / transfer case makes it sit a little lower than the same spring on a prerunner.

 

That's what I was thinking

 

well just bought a complete set of all pro extended stainless brake lines and an all pro ubolt flip kit with a set of factory bumpstops to go along with it. who's gonna help me with the install? lol

 

I'm pretty new here. Originally from Mobile. In NY now for school. Just bought a 2012 4cyl AC 4x4. I've seen that some of y'all have the OME lift, and that's what I plan on getting. Just wondering if you've had a good experience? Any vibes or anything? Are you running the stock UCA's, or would you recommend upgrading?

 

UCA's, yes, to get alignment correct in the front with respect to caster. Not enough caster makes it wander-y.

Vibes, this seems to be on a case by case basis depending on who knows what. I did carrier bearing spacers, and that didn't work. I did axle shims, and that did the trick. You have to get a spacer for the pin that holds the leaf pack together as well, to make sure that it seats correctly in the spring seat on the axle.

As far as the quality of the OME kit, I've been happy. It's stiffer than stock, but the added damping definitely helps running a heavier / larger tire. I ran stock wheels / tires for the first few days after installing the lift, and it rides a LOT better with the 285's.

 

As far as vibes, i didn't install anything and I've never had any

 

Went and looked at a MGM 12 today...