shovel, axe, other off road tool mounts...

Couldn't figure how to word the title. I ordered the ATO hi-lift jack mount for the bed, and I want to see everyones bed set-up for their other tools! I am purchasing a small tool box to keep my ropes and straps and other hand tools in, but want to also put an axe and shovel in the bed..

So please post pics. If you know where you got them from, post the links.. roof rack set-ups also welcome!

thanks.

(and if there is a thread like this made.. post that.)

 

No pics but quickfist from Cabellas. They are very handy for holding axes and shovels in place.

 

i have heard of those and will be getting a few for my roof rack... when i get one

 

I keep everything but the hi-lift in my bed box.

I have seen people make mounts very similar to the hi-lift mounts. Drill a hole through the handle and then drill a hole farther down the shaft. Mount your bolts on the bed rails using a bracket of some kind and then you use wing nuts to secure it. Run a cable with a lock and lock it to the bed tie down. For an axe use a larger bolt on one end and drill a hole through the very end of the bolt and place a pad lock. You can get cheap die and tap sets at HF to chase the threads after you drill.

 

pictures from user Streakerfreak on expeditionportal

 

That box can hold a suprising amount of recovery gear. hi lift to the rear.



You may like this.
http://www.hi-lift.com/handle-all/index.html

 

thanks so far.. getting ideas..

also anyone have experience with the roto-pac's and their mounting setup for our bed track system.. saw they have extenders to mount multiple cans and also a locking end to prevent stealing.

 

I think I want to get a pelican case for the back of my truck, I was thinking about a tool box but I think a hard case box would suit my needs a little better.

 

I drilled some holes in the "legs" of the case and bolted in to the bed. Its rock solid and with 7 security clips and 2 locks its not going anywhere.

 

this

good to know. what are the dimensions on yours?

 

I've got the 1650 no foam. 32x21x13

$320 Pelican 1650 Rolling Case No Foam (Black)

http://www.amazon.com/gp/product/B0029Q7AL0/ref=oh_o06_s04_i00_details

 

cool thanks

 

no more?

 

bruteforcefab.com

 

^^ i really like that!

 

I see awful pictures of flying projectiles in an accident. They look really secure but they are mighty sharp...

 

here is the link to his website: http://www.bruteforcefab.com/

you should give him a ring his name is billy ive met him before and he is a really great guy that does solid work!

 

or you could put a chase rack on

Here are some more pics

 

i know this is an old thread, but that rack is F-ing awesome dude

 

x2