*Lets See Your Spindle Lifts*

All-pro 3" standard leaf pack with billies set at .85 and you should be perfectly level.

 

i wanted it to sit just a little bit higher in the front would it be too much with all pro 3" and billies at 1.75?

 

Nice looking ride man I would go with the All Pro leaf pack but im not so sure about settin the billys at 1.75 I would keep them ware there at.

 

Eh i wouldn't do that with a spindle lift. Just keep them at .85

 

I'm new to this Spindle lift, my truck is completely stock. What exactly is a spindle kit?
Sorry guys for sounding like an idiot haha

 

here is my spindle lift

 

alright thanks hopefully il get those all pros pretty soon!

 

What size tires? ^

 

Well I have got most of the suspension on but I'm just waiting on my Fox CO to come back in the mail. I had a small leak on the hose fitting at the flange nut. I had to send it back to ORW to get the compression back. The TC LCA install created a little more fabricating on the Camburg Spindle Lower ball joint bolts (needed to be shortened). And, I had to weld in a spacer for the bump stop.

I have to say that the rear stock brakelines were hell to install. Toyota over tightened the fitting and the flange on the stock lines would not come loose. I eventually just took a cutting tool and cut the stock hose fitting and had to pry it off. The front extended brake lines that JP sells here needed to be notched more with a cutting tool to accept the stock bracket mounting plate.

All in all the setup looks great...pics to come!

 

ummmm....there are all kinds of pics in this thread....bro...!!

 

I can take some pics of what I was talking about later this evening. My truck is still sitting over at my uncle's shop on jack stands. I just need to bleed the brakes, finish painting the front calipers, and get the CO back on. The Fox CO is suppose to be back Saturday.

 

Ummmm thanks, I know that, I was referring to the post directly above mine. But thanks for your concern.

 

When you p ull the front lines doesn't a ton of fluid gush out? Or does it slowly drip?

 

It isn't that much fluid but it will drip a small amount to stain your concrete and get on your LCA's/bumpstop. It is a good idea to a have a drip pan or a leftover coffee container to catch the residual fluid. I would have some cleaner or degreaser on hand to wipe off any brake fluid on painted surfaces because it will eat through it if you left it there overnight.

 

I just ordered some maxtrac spindles. I'm thinking of replacing my stock coils w/OME 883's w/5100's set at 0. Do you guys think I'll have major BRO lean with just my 2' aal?

 

Yes, Allpro Expedition Leaf Packs will leave you perfectly level with Maxtrac Spindles and 5100s set at .85, anything less in the back and you'll have bro lean.

 

Anybody in here have a longish term review of the all pro expos? I see a lot of y'all are running them

 

I want new spindles that arent for liftin just that are longer, any recommendation?