AAL question

with the Bilstein Adjustable lift kit with 5100 shocks from Toytec it comes with the 2" AAL. it doesn't come with new Ubolts do i need to get those or will all the stock equipment work with this set up?

 

It's recommended to get new U-bolts. I did, and I would if I were you.

 

From my understanding the stock u bolts will fit.

Do you have the rear leaf tsb pack by the way?

 

Be on safe side and use new bolts

 

I installed a Wheelers 2" AAL with 5100s. The U Bolts do fit. However, it is recommended to not re use old U Bolts. A few weeks down the road I did the U Bolt flip kit

 

No tsb i havn't had problems with my rear springs and towing. mostly my concern is comeing from only being able to spend 700 and the lift plus the centering pin plus u bolts comes out to about 720

what could happen if i don't use the new U bolt or centering pin? also would i be ordering the 7 1/2 or 8 1/2 for the 2" AAL?

 

You're gonna need a new centering pin no matter what because the AAL will be too wide for the old centering pin. The 7.5 is what you need unless you're running blocks.