1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Driving auto like manual

Discussion in 'Performance and Tuning' started by MatthewMay1, Jan 23, 2012.

  1. Jan 23, 2012 at 6:05 PM
    #1
    MatthewMay1

    MatthewMay1 [OP] I'm an amateur professional.

    Joined:
    Nov 21, 2011
    Member:
    #67486
    Messages:
    11,091
    Gender:
    Male
    First Name:
    Matthew
    Lone Star Republic
    Vehicle:
    Supercharged '01 TRD
    I am going to first say that I wasn't sure where to post this so I chose here in the performance section. That being said, I want to know if it is possible to drive my automatic transmission like a manual. Such as starting out in 1, then moving into 2 and so on until reaching D. Is this bad for your transmission?
     
  2. Jan 23, 2012 at 6:30 PM
    #2
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,510
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    :facepalm::facepalm::facepalm::facepalm::facepalm::facepalm:
    no, there is absolutely no point at all and it is completely redundant. the gears on the auto are for engine braking, they won't actually shift the transmission up and down like driving a manual, all they do is limit it.
     
  3. Jan 23, 2012 at 6:31 PM
    #3
    TACOMABOSS

    TACOMABOSS Well-Known Member

    Joined:
    Jul 7, 2011
    Member:
    #59499
    Messages:
    4,296
    Gender:
    Male
    Vehicle:
    96 SR5 4x4
    Bilstein 5100s, Toytec AAL, Deck plate mod, Hella 500ff's, Sportsman Camo seat covers, Total Chaos 1" diff drop, JVC stereo, Painted bumpers and grille, Custom grille insert, HID projectors, Black spray paint
    i guess its possible but why would you want to?
     
  4. Jan 23, 2012 at 6:33 PM
    #4
    ATweezy

    ATweezy Well-Known Member

    Joined:
    Oct 28, 2011
    Member:
    #66028
    Messages:
    67
    Gender:
    Male
    First Name:
    Brad
    Arizona
    Vehicle:
    11 Red RC 4x4
  5. Jan 23, 2012 at 6:37 PM
    #5
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,510
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    oh no! you must not realize, shifting gears (EVEN IN AN AUTOMATIC) makes you look super cool, like a race car driver, and it impresses the bitches so much they instantly jump on you and give you road head!
     
  6. Jan 23, 2012 at 6:37 PM
    #6
    jflan

    jflan Well-Known Member

    Joined:
    Dec 26, 2008
    Member:
    #11901
    Messages:
    1,017
    Vancouver, WA
    Vehicle:
    09 Access 4x4 2.7L manual SR5
    SnugTop SuperSport Sportsman keyless cap Weathertech mats - OEM skidplate - OEM hitch
    :rofl:

    Coolness will definitely take a hit.
     
  7. Jan 23, 2012 at 6:38 PM
    #7
    blt2tuk

    blt2tuk Well-Known Member

    Joined:
    Dec 4, 2011
    Member:
    #68147
    Messages:
    237
    Gender:
    Male
    Franklin, North Carolina
    Vehicle:
    1996 Toyota Tacoma
    Yes you can. It's absolutely fine and not going to Hurt a thing. Unless you absolutely abuse the heck out of it. But it is a little unnecessary lol unless your using it as engine braking as stated in the above post. That's why it's an auto
     
  8. Jan 23, 2012 at 6:39 PM
    #8
    h.zack801

    h.zack801 Scumbag Extraordinaire

    Joined:
    Dec 23, 2011
    Member:
    #69271
    Messages:
    4,940
    Gender:
    Male
    First Name:
    Zack
    Columbus, OH
    Vehicle:
    Truck Parked Mod
    Door Dings
    well, i will say that i do it sometimes on very hilly stretches of road because i find it utterly annoying that the auto shifts up while going up a hill, just for it so shift right back down a second later. irks me. not to mention if im screwing around and want to wind it out a weency bit before shifting, unlike the auto. maybe im dumb. maybe deep down i want a standard, but i know it'd get old shifting ALL the time.
     
  9. Jan 23, 2012 at 6:39 PM
    #9
    Maverick904

    Maverick904 Resident Fishing Expert

    Joined:
    Sep 21, 2009
    Member:
    #23084
    Messages:
    4,892
    Gender:
    Male
    First Name:
    Kameron
    Northeast Florida
    Vehicle:
    08 TRD Rugged Trail 4x4
    3" Procomp Lift, BDF Light Bar, Borla Stainless Cat-Back System, 2 10" Polk MM Subs, LED Interior Lighting, Pioneer Touch Screen, Kicker Speakers up front, Sonys in the back, Grillcraft grill, 20% tint, Weathertechs, Projector Retrofit Headlights. BHLM
    Why not just get a stick....
     
  10. Jan 23, 2012 at 6:40 PM
    #10
    KenLyns

    KenLyns 8.75" Third Member

    Joined:
    May 23, 2010
    Member:
    #37674
    Messages:
    29,365
    Gender:
    Male
    Belly of the Beast
    Vehicle:
    4x4 TRD Off-Road Full-Auto
    LED Headlights, Volant CAI, 32" Duratracs
    ^ According to Car and Driver testing, the 5-spd auto is half a sec. faster than the 6-spd manual to 60 mph and in the 1/4 mile, possibly due to the auto's better-spaced ratios, so you have one fewer shift on the dragstrip.

    OP: If you floor the gas pedal, the ECU will automatically select higher-rpm shift points anyway, so doing it yourself won't be faster.

    I sometimes row through D-4-3 for engine braking, that's about it.
     
  11. Jan 23, 2012 at 6:41 PM
    #11
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,510
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    edit: im a derp and dont know 2nd gen trannys
     
  12. Jan 23, 2012 at 6:41 PM
    #12
    Maverick904

    Maverick904 Resident Fishing Expert

    Joined:
    Sep 21, 2009
    Member:
    #23084
    Messages:
    4,892
    Gender:
    Male
    First Name:
    Kameron
    Northeast Florida
    Vehicle:
    08 TRD Rugged Trail 4x4
    3" Procomp Lift, BDF Light Bar, Borla Stainless Cat-Back System, 2 10" Polk MM Subs, LED Interior Lighting, Pioneer Touch Screen, Kicker Speakers up front, Sonys in the back, Grillcraft grill, 20% tint, Weathertechs, Projector Retrofit Headlights. BHLM
    cant on 2nd gens.

    technically our "D" is overdrive. so in our case dropping the tranny down is "turning it off"
     
  13. Jan 23, 2012 at 6:42 PM
    #13
    MatthewMay1

    MatthewMay1 [OP] I'm an amateur professional.

    Joined:
    Nov 21, 2011
    Member:
    #67486
    Messages:
    11,091
    Gender:
    Male
    First Name:
    Matthew
    Lone Star Republic
    Vehicle:
    Supercharged '01 TRD
    All I wanted to know was if its possible. It's not like I'd be doing this all the time in place of the auto. Then that would be dumb. Very dumb.
     
  14. Jan 23, 2012 at 6:43 PM
    #14
    h.zack801

    h.zack801 Scumbag Extraordinaire

    Joined:
    Dec 23, 2011
    Member:
    #69271
    Messages:
    4,940
    Gender:
    Male
    First Name:
    Zack
    Columbus, OH
    Vehicle:
    Truck Parked Mod
    Door Dings
    this.
     
  15. Jan 23, 2012 at 6:43 PM
    #15
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,510
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    oh...shit...whoops:anonymous:what truck doesen't have OD...lame
     
  16. Jan 23, 2012 at 6:43 PM
    #16
    Maverick904

    Maverick904 Resident Fishing Expert

    Joined:
    Sep 21, 2009
    Member:
    #23084
    Messages:
    4,892
    Gender:
    Male
    First Name:
    Kameron
    Northeast Florida
    Vehicle:
    08 TRD Rugged Trail 4x4
    3" Procomp Lift, BDF Light Bar, Borla Stainless Cat-Back System, 2 10" Polk MM Subs, LED Interior Lighting, Pioneer Touch Screen, Kicker Speakers up front, Sonys in the back, Grillcraft grill, 20% tint, Weathertechs, Projector Retrofit Headlights. BHLM
    see my edit
     
  17. Jan 23, 2012 at 6:45 PM
    #17
    Max-4_Yota

    Max-4_Yota The Welfare Cadilac

    Joined:
    Dec 10, 2009
    Member:
    #27357
    Messages:
    4,235
    Gender:
    Male
    First Name:
    Michael
    South Carolina
    Vehicle:
    3rd gen Tacoma
    Chicken lights, chrome and smoke tunes.
  18. Jan 23, 2012 at 6:45 PM
    #18
    krimson

    krimson Nothin

    Joined:
    May 17, 2008
    Member:
    #6714
    Messages:
    3,401
    Vehicle:
    TRD Off Road
    OME 3" lift with 885 coils. OME Shocks with TSB 1.5 AAL. 285/75/16 KM2s. XD Hoss 16" wheels. DDM Tuning 6000K HIDs, H10 6000K Fogs. BHLM. Debaged. 20% tint on front windows.
    This isn't Fast and Furious :p no It's not gonna make a difference. You'd just come off looking like a ricer. I knew a guy that drove his automatic Eclipse like that and he just looked like a douche canoe more than anything.
     
  19. Jan 23, 2012 at 6:47 PM
    #19
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,510
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    would i be just as cool if i did it in my last taco with a steering column shifter?
     
  20. Jan 23, 2012 at 6:50 PM
    #20
    BlueTaco07

    BlueTaco07 Super Mod!

    Joined:
    Jan 2, 2011
    Member:
    #48598
    Messages:
    2,410
    Gender:
    Male
    First Name:
    Cody
    Panama city, Florida
    Vehicle:
    Looking
    Listen all OP wanted to know is if this harms his tranny or truck in anyway shifting up or down shifting. So Instead of making fun of the question someone should answer him because I would like to know as well :D
     

Products Discussed in

To Top