3 inch lift with 33s Question

Ok so i got the bilsteins and the eibach 3 inch lift coils with 2 inch block in back and i'm goin with a 33x12.5 on 15x8s. what kind of rub am i looking at?

 

What are the specs on your wheels? Offset, backspacing....

 

Annnnnddd this is the 35,456,959,235th thread with this exact question. OP, I had to cut some plastic, and use a BFH to smash down the pinch weld so I wouldn't rub.

 

i think my offset was -19

 

This is what i was thinkin either way i got a backup plan! the 33s were free.

 

That's 3.75" backspacing, so at least you won't be hitting the control arms or anything. I'd imagine you will need a moderate amount of trimming, as noted above.

 

As Pyroskier said cut and hammer. Btw I have the same backspacing so use a BFH.

 

Well now that question A is answered how is the gearing on 33s i'm assuming that with a 4.10 will work out fine with a v6?

 

Bump

 

I just read a thread saying that a 4.10 is good for daily drivers and 4.56 is good for offroaders.