First "MassHole" meeting Sunday

Nope just underneath the door and on the door sill near the Tacoma protectors. Close call haha

 

So I'm back from my vacation...when's the next meet?

 

Im still recuperating from the last expedition hahaha

 

I tried painting my grill black sand pearl . Tried 4 times pain in the ass gave up and plasti dip it . So take your time and give it a lot of time between coats .

 

I say we check out those spots up in nh that everyone talks about .
Or back to taunton really doesn't matter to me .

 

x2. Hopefully my truck will be out of the shop then!

Mast Rd. in Merrimack, NH is a good one.

 

sound like fun i be there

 

Did I miss something?

 

All this i think .
I'm up for next weekend . Should have my truck fixed by then .

 

I can't make it this weekend if you guys go to NH got a lot of stuff todo

 

Hey AJ
I might be buying a new grill soon . I'll sell you my satoshi for a cheap price , if your interested . I'll let know as soon as I figure it out .

 

My truck has a whine in the engine, lower driver side....any ideas what it could be? Just started on Monday

 

That sounds exactly what mine sounds like now? Its almost like a whisper though. Like wind blowing or something..... But on the drive side

 

This is just hearsay, but isn't mud one of the single most detrimental things for anything mechanical? Also if I'm not mistaken, on 1GR-FE's the alternator is on the lower left side of the engine. Lots of slots for mud to get in... Hope this helps, and whatever that noise is, i hope is not the alternator on the way out.

 

I believe this distinction actually belongs to woman.

So, are people planning to meet up someone where for wheeling this weekend?

 

I'm all for offloading, but willingly, and intentionally, subjecting my truck to deep mud is not something I do. In fact I try to avoid unnecessary puddles, unless there really is no going around them. I know a bunch of you will tell me to loosen my girls underwear, but until I finish paying this thing off, I don't want to do something I might regret..... Ya know whadamean?

 

Both of you guys got stuck in deep water. Most likely it is dirt from that water that is making the noise in the alt. Spray water from a GARDEN HOSE at high pressure (not from a car wash). If you have any dirt in there it should come out this way.
You may need to start the engine to move the bearing and repet the process. GL

 

AJ, sounds like we have the same issue.....is it possible to rinse out those slots from underneath?

 

Thats the way to go. Dont do it until your ready to get stuck. Being stuck isnt that bad though

 

You should be able to get to them fairly easy, definitely want to do it soon, when the mud drys up becomes a real female dog to get out.

Different subject.... Anyone here done the bhlm?