Cheap and semi easy organizer for center console.

Don't smoke in the truck, don't smoke in my house either.

 

Nice Job, I may have to try this one.

 

Very nice idea. Especially like that the dividers are transparent, making it easier to see what's inside each compartment. Will probably make my own soon and may even extend the idea to my bed box as well. Lots of room for creativity in that tool box.

 

Good idea might have to try that myself

 

if you want nice clean edges on that stuff use a heat gun and just melt em a bit

 

Might try that. You know of a better cutting method?

 

Must go Commando!

 

Good for you, actually. That is a good practice.

BTW, divider looks good, might wanna buff those edges up a bit.

 

Thanks, believe it or not, I hate the smell. Lol.

And ya one guy mentioned a heat gun, you know of another way?

 

I've seen a cloth buffing pad that attaches to a drill will work too.

 

+1 for you. Great idea

 

Thanks, may try that.

 

I use one of these http://menards.com/main/tools-hardware/power-tools/saws/2-3a-oscillating-tool/p-1716526-c-9082.htm for cutting plexiglass and it works well.

 

Thanks, I think my dad has one of those. Ya the Dremel, no matter what speed I set it at, kept melting it as I cut. Was a pain in the ass.

 

Good idea for doing the bed box.

 

dig it

 

Just did this using plastic and trim i found laying around. Thanks!

 

Looks good! You hardly have anything in there to organize! .

Its funny, I have been digging through that thing for over 2 years to find stuff, and never thought about something like this. Something so simple.

 

Good idea! You should run a bead of clear silicone in the corners where the acrylic pieces connect to secure them. And like someone else said, melt or maybe sand the edges smooth as a finishing touch.

 

Thanks, ya I thought about the silicone, but once its in and all together, it really doesn't move around to much, plus it might be a pain to get in and out if you wanted, without tearing the silicone apart anyway.

But ya, I will probably be making another one and hope to do some cleaner cuts and then I'll smooth it out too.