Salvage yard find - What do you need?

I'll make another trip in the next few weeks so let me know what you're looking for

 

They were all access cab. Sorry

 

Sweet, well depending on price, and if its even possible. I would love the back of the center console(its a seperate piece). Not sure if they would even seperate that or if they would want to just sell the whole center console.

And +1 for doing this for everyone.

 

I could use the center console lid....really just need the button and spring for the latch.

 

No problem. The console that I saw had some dirt on it but I think it should clean up nicely. I can grab that and hopefully part it out to both of you the next time I go. Deevon911: you're talking about the part that houses the cupholder, right?

 

Sweet, only if Dave doesn't need the lid latch Shoot me a PM if it works out and I'll snag it.

 

How about the piece under the climate controls and above the center console that has aux port and switch blanks in it in gray? I need manual tranny if that matters on the driver side of it where the emergency brake is.

 

Ya I don't need anything but the back, I need the part that is below the cup holders, if you know what I mean. The piece that is vented for the inverter.



Minus the plug obviously, mine is cracked, even though you can't see it in the pics.

Oh, and I guess it depends on what color Joe Joe needs too.

 

if you don't mind OP, could you kind of post what you've been buying and how much? I just wanted to know for future reference what kind of prices we'd be looking at, at a junkyard, i've yet to find a tacoma in one so far

 

Its a stretch. If they have the inner door skins (05-08 Access Cab) where the speaker grill shows in grey I would buy both f those for the right price.

 

Sent my money this morning! My dead pedal should be on it's way real soon!

Great guy to deal with here.

 

I know they had this part but I'm not sure how to remove it and I took the aux port for my DIY aux mod so it would just be the trim. If you can get me instructions from somewhere on how to remove it I can try the next time I go.

 

All the interiors I saw were grey. Can you pm me some instructions or a link to some on how to remove this part without breaking anything?

Thanks

 

I don't have any pics, or know of any instructions. But I cracked mine becuase I wasn't careful. When you take the center console out and flip it over, it just kind of clips on all the way around. you will see what I mean when you look at the console upside down and look at this piece. Just have to be careful. Its not hard.

 

Any news on the tie down cleats or armrests? I also need a passenger side rear 4x4 mud flap. Thanks in advance

 

Looking for a glove box door damper...

 

Don't care about the aux port as long as the piece isn't gouged, scratched or broken. There is a manual stickied here somewhere that should have some clues about disassembly. I haven't had that apart on mine....yet.

 

Any idea how much they want for the parts needed for a 4x4 conversion? I would need the front diff, axles, hubs, transfercase, trans, and all the electronics.

 

V6 engine cover? It'd have to be pretty smashed up to ruin that. LMK thanks.

 

There was one but it would probably be pretty pricy to ship. I think I'm going back tomorrow though so I can grab it if you want but I'm not sure how much it'll cost