North AL Burgers, Boggers, and Modders Meet!!

We need to save a spot on the concrete for the street truck. Looks like it is going to be a little chilly for the meet.

 

He can park under Kyle.

 

^^^ HAHA!! I wish!

I call beside the Camaro!!

 

So what do you guys think about putting a line down the fence on my neighbors side and a line down the garage/camaro on the street side. Then we could leave the driveway fairly open and move people in and out as we work on their truck.

 

hey brian we still cool to do the mesh inserts on my scoop and the lower part at the meet?

 

I don't care as long as i'm early and in my spot.. Brian I have a feeling that your yard is going to be pretty tore up Saturday after everything is over with..

I say we line them up as close to the house as possible facing out toward the driveway. Leaving a lane open for people to travel close to your neighbors fence so they can park... If that doesn't make sense let me know...

 

as long as you got enough room to park the truck and trailer idc where

 

280 leeds straight into fultendale doesn't it?

 

Are you planning to pull the truck off the trailer at my house and then drive to the wheeling location? We can leave the pulling truck and trailer on the street at my house and you can drive your truck back to the back with the others.

 

yes, my truck is totally driving capable...just don't want to use my gas dad can put 5 gallons of oil in his diesel and make it back to B'ham on that 5 gallons of oil. gotta love the diesel.

 

no, no it doesnt. you will have to take 280 to hwy 31 to 20/59SW to 65N then you get to fultondale. or just stay on hwy 31 n and run through some shady neighborhoods until you hit fultondale.

 

From Chelsea, It's probably easiest to just take the 11 to the 52 and then get on 65 north.

 

unless he lives right off 280. then just run down 280 all the way into b'ham and hop on 31 (red mountain expressway) run that to the junction and hit 65N

or just google map it and you will see which looks easier vs fastest vs the way you want to go.

 

Looks like we have great weather for the meet. Sigh...

 

Someone bring a steel barrel, we'll have a hobo fire.

 

OK folks bring ya some spending money to the meet cuz ive gotta sell some stuff.

Got a set of 1.25" spidertrax hubcentric spacers - $60
IR 1/2" drive 600ftlbs air impact - $80

gotta sell these so i can get the next mod for my truck. so help a fellow out if you would and get some quality stuff in the process.

ok enough of the sales pitch, but i really am bringing this stuff to sell. and i do have to sell it to get some monies. pm me if you have questions on any of it.

 

That's what I was going to suggest as well. At 7:00 on a Saturday, 280 should be wide open. Might beat back roads, particularly hauling a trailer.

Phew, they've dropped it again. I PM'd Brian, and I'll be bringing a 80k btu convection heater and LP tank to put in the garage. May not keep it tropically warm with the door wide open, but it beats a stick in the eye.

 

if those spacers fit mine ill buy

 

i will! Thanks

 

you got a 6 lug right? they should fit first and second gen 6 lugs. first gen guys let me know if im right or wrong.