4" Spindles (with Brake Lines) by MaxTrac GroupBuy Nov. 3 - Nov. 11

Interesting, I have expo leafs and was planning on closer to 4" with just the spindles and then Bilsteins at .85. Guess I might jack them up to 1.5 if I have to much rake with the Maxtracs.

 

Me? I'm at 28" at the hub and 41" from the ground, wich is weird because the coils are set to 1" and I have 5 inches of lift up front. Rear is 38 to the ground with a 1.5" aal and 265/70/16, toytec coilovers in the front

 

Everyones measurements are soo different, all I know is the ucas and lcas are nearly flat.

 

tacwut, i doubt you got only 3 in off ur spindles.i would believe atleast 3.75"..im at roughly 5.7 in from when i was stock with spindles and 1.75 on 5100s..

 

I'm starting to have buyers remorse with 285/70-17s, kind of wishing I'd have bought 33s for my spindle lift, but have always heard they're hard to get to fit, I don't aggressively wheel, but I like to go with the proven size.

 

285s will be fine....all of us are running 265s so that probly what is making you have remorse.

 

I installed my spindles today!!!!!!!!!!

I have Eibach Springs and 5100's set at 0 with the spindles and from middle of the hub to fender is 25"

 

Why is mine 28" this is so weird...

 

What spring are you running? And are you measuring at the top, bottom or middle of the hub? Mine is measured as close to middle as I could eye ball it...

 

Told you boys!

 

Yeah i got my measured from close to center hub as possible. But i think its perfect with my 265/70/17

 

I have expos with the maxtracs and my front looks level or a little higher...

 

Yours were 17" rims!?!? Im running 285/75r16...

 

Yeah, i couldnt pass up on that amazing deal that i got. It was that package so i only had the option between two different wheels n both were 17"

 

Well emailed that one guy for these and no reply, after seeing all the pics i wamt em lol anyone know who i can order them from? Website?

 

Running toytec coilovers with only 1" of thread showing, it steers better also

 

hmmm, i think we should all take exact measurements...start an official maxtrac spindles thread with instructions to post measurements...and...be sober while using the tape measure...i know i'm at ~27.5"...but I' having a hard time with the rest of your numbers...like kink, your front end looks beast compared to mine...tho i do have about 2.5" on my ass...but technically I should be .75" higher than you since you have 1" on your coilovers and my shocks are set to 1.75"...and yet you're still 1/2" higher than me....mystery.



Sweet color by the way...

 

Hey guys once i get my maxtracs on i will give lift measurements off of an all stock trd front end as i will be removing the shitty 2.5 spacers and allready have the stock measurements from hub center to fender, hope this helps

 

Pm maxtracbob n he can tell u bout a vendor in ur area. They're good bout making something happen.

 

Awesome! you're not going with anything else but spindles? I would like to know measurement difference from stock to spindles only...to see if it's 3.75" like bob said...or a true 4"...