What Have You Done To Your 2nd Gen Tacoma Today?

its just like guys with 33's who think they dont rub

mind you i did not rub on daily driving until i put uca's on, its been nothing but a nightmare since, more cab mount chop, pinch weld etc....

 

Just got my Urd maf cal in the mail..

 

Its cranked as far as it will go.

 

I had it flexed out on trails and rubbing wasnt an issue. These on the other hand......i'm gonna have to go ^^^^UP^^^^....higher.

 

about to debadge and maybe look into a new trd exhaust

 

Nice I'm looking into the TRD cat back as well.

 

Eh lmk what you end up doing...i'll probably follow in your foot steps and add some lift to my truck as well.

 

than your hitting something, cuz my tire goes well past that for turning, like well well past, ill take a picture sunday for you to compare

but i also do not have a sway bar, i have UCA's

but still pretty sure you should be able turn more than that, to me it looks like you were 1/4 to 1/2 turned

 

I just went out and got crazy with it and got it all cockeyed and i'm hitting cab mount

You nailed it on tha head..I just wasnt getting all turned and cranked on a hill when turned. I AM HITTING ON THE CHEAP ASS PLASTIC ALSO. That's most of it. But I am hitting on the cab mount on the corner. I'll take pic of the rub mark.

Thanks for all help fellas.

 

Installed Wheeler 1 1/2" AAL. No more tail-dragging look. Rides really good. My driveway is a little uphill but you can tell by the fender gap that it is higher in the back now. Actual measurement is an increase of 1 3/4", but it will settle some.

 

Exactly!

 

Having my 10,000 miles service done right now at Piercey Toyota

 

I'm gonna make it work dammitt.....whatever it takes!!

 

Got my truck back from its Rear TSB yesterday. What a difference it makes.

I loaded up about 300sqft of sod before I had the TSB done, was sagging pretty low. It made the rear end dip down lower than the front.

After the TSB had to go pickup the other half of my sod, same sqft. Truck maybe sagged 2 inches, 3 at max, not 100% sure I didn't measure it so I'm only guessing. But it was no where near what it was at before the rear TSB done.

If your thinking for one sec, 'should I do the rear TSB', the answer is yes. And its free.

 

its okay i didnt believe i was rubbing either, but it is what it is

got your alignment specs?? lol, i think you have a lot more caster than i do

hahaha i also noticed your running a fabtech 6" lift so that helps a lot

im only running 2.75" of lift i just ordered 35's too