What have you done to your Tacoma today? 1st Gen Edition

Finally did the "Grey Wire" mod today And started putting a Daystar 1" body lift. Should have it finished tomorrow. Needed a lil bit more room for the mudders.

 

The oil from the axles soaked my rear drums and they're shot too (I saw this in the shop when I was there today), so now add a rear brake job, and the original $50 dollar oil change I went in for, and our total will be about $800, with me getting a discount since the dealer I work for uses this shot for our repairs. Fuck ha.

 

Added more LED's to my ride... Check out the slow but growing LED build in my signature (below Fuelly Link).

 

^^^ Looking good with the LEDs, man. Thinking about going through mine.. Just not sure what color. I've got the old man brown interior and exterior..

 

aluminum angle iron bolted to the radiator support...ill take some pics at some point cause i get alot of people asking about it

 

Figured out that the body shot that fixed my truck didn't tighten the bolts all the way and my bumper was sagging. I've thought for a while that something was wrong but now I know what it is, taking it by in the morning to have them fix it.

 

Well, blue & brown might clash, maybe go clear? I love the clean look of the LED's My next replacements are the parking lights, brake lights and license plate lamps.

 

I've got mine mounted on the core support with two pieces of angled aluminum for the lights to mount to.

 

Yea probably the same way mine is mounted..but they damn sure dont rattle around so im happy with it

 

And 6 cans of bed liner later....

 

Siiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiick

That rear bumper is tits

 

I was going to do it but my dad just wants me to take it back to the shop and have them do it. He's paying the note so I've gotta listen to him.

 

I can fap to this!

 

still haven't been able to fix mine...

 

Yeah man. I knew the quality was going to be good from others but these exceded my expectations. Tim really does some awesome work.

 

we where cool and now i hate you!

 

yeah. the last time i crawled under there i do not recall seeing the pivot point that is highlighted in yellow in the picture. so i'm thinking the rubber stoppers on either side of the bumper have something to do with it because when i move the bumper up and down in the general vicinity of the stoppers, it seems to make a difference. i'm thinking they are weather worn and need to be replaced.

 

Don't worry buddy, you wouldn't like these. They can't be tire shined

 

yeah ive messed with the bushings before when i took the bumper off to derp it and it wasn't too bad but still a pain in the ass
i'll give it another try tomorrow, its been too cold lately and ive really just forgot about doing it