AZ Classifieds

ill let you know if i end up needing them or not.
i still want to do that dash when i get my truck. maybe next weekend or something we can run down to the shop with some card board and mock it up so we can cut all the plates before i get my truck back?

it would be cool to kind of box around the spindle making it stronger too..... if i run across a pair of spindles i think i might buy them and make a little project..

 

Welding on cast is not as simple as breaking out MIG and laying down a bead dude. These are a 10 hour + job to do right and have to be TIG welded with cast specific rod at a very specific temp in order for the spindle to maintain its structural integrity.

 

i need the passenger side leaf. mine is broken in half hahaha. what side do you need eric?

 

I dont think they are side specific. If they are then I dont know which one came from which side so you guys are screwed lol

 

The truck....and some hardware. The pic tells the story.

 

I got 3 Bed Cleats $45 bucks.

 

Just got those cleats from hitman thanks a ton!!!!

 

Did you decide on plans for the truck yet?

 

Bump for a new price. $120, someone come get it! It's taking up too much space in my room.

 

Hi all,
I am new to TacomaWorld but have been on ToyotaNation for about 6 years. I didn't know this forum was here until I saw a Red Tacoma today with a sticker on it. Anyway, I sold my 05 Tacoma PreRunner Offroad and I have my schosche dash kit, HU and wiring harness for sale. Email me josh71p@hotmail.com if you are interested in anything. I am located in S. Phoenix but will meet up almost anywhere.
http://www.tacomaworld.com/forum/bu...d-maf-cal-more-fs-phoenix-az.html#post4630258
Thanks for looking!

 

Interested in any trades for the calibrator?

 

looking for an air compressor. 60 - 80 Gallon. Must have a cast iron pump. If you have one have one taking up room let me know a price. Might be willing to trade a Garage floor coating for it depending on brand and such.

 

I'm still trying to piece it together but I'm not totally sure yet so I'm biding my time.

 

Lol well it was nice to meet you the other day. Your truck is nice!

 

Hey hey hey

 

I have a Grey micro fiber sofa and chase lounge that both recline and are in good shape, no tears or rips. Here in Power Ranch, $250 picked up, 714-390-7306.

 

Bump!!

 

That is a good deal but a hell of a drive for me

 

Here's another pic of it

 

Bought a NAPA branded battery Wednesday before I'd diagnosed my bad Alternator. Has about 110 miles on it, Only been charged at factory, and by battery charger in my garage.

I paid 95 plus tax, currently looking for the receipt.

50obo, locally only.

Details from NAPA site

http://tinyurl.com/89vpbew

Part Number: BAT 7535
Product Line: NAPA Batteries
Attributes:
Battery Application : Automotive
Battery BCI # : BCI #35
Battery CA @ 32 Degrees F : 800
Battery CCA @ 0 Degrees F : 640
Battery Height : 8 7/8"
Battery Length : 9 1/16"
Battery Load Test Amps : 320
Battery Posts Type : Top Mount
Battery Reserve Capacity : 100
Battery Voltage : 12 Volt
Battery Weight : 38.2 lbs
Battery Width : 6 15/16"
Measuring State of Charge : Batteries Below 12.4 Volt (6.2 Volt For 6 Volt Batteries) Must Be Recharged Before An Accurate Load Test Can Be Performed.
Physical Inspection : Terminal Inspection: Broken Or Loose Due To Abuse, Burn Marks From Shorting, Damage From Fire, Explosion Or Collision.
Safety Precautions : Batteries Expel Explosive Gases. Keep Sparks, Flames, Burning Cigarettes Or Other Ignition Sources Away At All Times. Always Wear Safety Goggles & Face Shield When Working Near Batteries. Do Not Leave A Battery On Charge For More Than 48 Hours.
Wet or Dry : Wet