LED kits, all orders come with free license plate lights!

These LED's are BRIGHT! I'm seeing tons of spots right now

Can't be happier with them, very quick install, great quality, love em'.. Thanks for the hook up OP!

 

ok guys, what is the trick to the map lights? do you remove the reflector? do you just let the board lay on the lense? if you were to put the board within the lense, only the very corners or the board would touch and not enough 2 sided foam would hold it.

 

Got mine yesterday! Looks like a project for today... Anyone got a thread on installing these??! When it comes to removing or replacing plastic pieces in my truck, I usually end up breaking them... lol

 

Go to harbor freight, get some trim piece pry bars they are like $10 and they come in very handy!

 

i used a small screwdriver on the driver side of the cab light and on the side of the map that you put your finger on to turn on and pry gently. went fine

 

Your dome lamp will have a notch on the left side. Pry that geNtly and push to the right, and it will drop open for you. For the map lights, pry from the inside edge to the outside. This is easier if you remove the overhead bin from the truck. The hardest part for me was that there are no flat spots to properly mount the led sets to once the lights were apart.

 

yes, no flat surface to mount. who has successfully mounted these?

 

For the map lights I used a little flat head screwdriver (i put scotch painters tape on the tip) to pry open the plastic and there is no way to get a grip on those lights. Use the same screwdriver to put some down pressure on the glass From above the bowl. Just be gentle.
For the dome light I couldn't put it right in the middle but it's only like half an inch off and it was flat enough.
Anyone done the licence plate lights yet? Any tips?

 

I finally got around to installing the LED lights from the OP. I forgot to update him so I will do it here.

Thanks a ton for all the customer service and the product was very nice. I found the lights to be a little bit fiddly but once I adjusted the holder it works good.

Thanks again.

 

The license plate lights were easier. Literally just plug and play. Unscrew, pop off the outer cover, twist the light socket from the cover, unplug the bulb and then replace with the led. Install in reverse.

 

Is there anyone who has paid that hasn't gotten any word on your order? I am still awaiting any info as to shipping.

 

I didn't get any confirmation or shipping info either. PMed LEDsolution on thursday but no word yet.

 

scratch that... extra parts for different trucks... I was looking at the 3 cords and I only needed the one...

as far as the flat surface goes, just peel off the double sided tape and stick it to something... mine is only touching one piece of metal and the spring thing that goes in place of the old light... ya like my technical terms?! lol

Aight, here ya go! it's still daylight, but I took pics anyway... WAAAAAYYY Brighter!!!













next mod is the projector HID's... (mine keep going out for some reason and I'm tired of replacing them, but I don't like halogens...

then I'm pretty sure I need a new battery! These LED's will NOT work when my truck is Off... my battery is from 10/09 and I have a ton of shit plugged into it already...

Rewire alternator next and track down my neighbor who rebuilds cars to help take dent out of 4Runner hood with scoop, paint it and replace on my truck...

 

the 09 has metal reflectors which prevent sticking the tape to anything which even slightly resemble a flat surface. so,,,,,,,,,

 

They all do HotRod. I just had to tape mine to the reflector. Plus, once you put the cover back on you will barely even notice where it is taped on to.

 

i'll go try that

 

I'm struggling with the licence plate lights. I took the screw off and then I took off the black plastic piece but I can't get off the clear plastic piece to get to the bulb itself

 

anybody have this happen? or get mismatched map lights.
I PM'd the op but no response.
first one is a video

 

I just got everything figured out with the licence plate lights but I must have fiddled with 1 of the lights for like 30 min. It would work only when it's barly plugged in. I would try and get the cover on and it would push the led in further in which would turn it off. I tried both sides but it just wouldn't work when it was plugged in all the way. Anyone know if I can do anything with the little prongs to make it work?

 

maybe bend the prong out a bit so it can have better contact??