1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Oem 2015 double din radio swap in a 06 ? Anyone have this hitch :: Tyger Auto TG-HC3T0068 Class 3 Trailer Hitch Combo with 2" Receiver Adhearing cellphone holder magnetic stand to dash!!! Trans fluid and diff fluid change 2wd prerunner Removing Fender Flairs 2012 Taco Auto Transmission Fluid Level

ABS disable mod for 05+ Tacomas w/o VSC & locking diff write up *pics*

Discussion in '2nd Gen. Tacomas (2005-2015)' started by rodstone, Feb 26, 2010.

Page 6 of 14
  1. Feb 23, 2012 at 7:28 AM
    #101
    landphil

    #101
    landphil Fish are FOOD, not friends!

    Joined:
    Mar 3, 2011
    Member:
    #52290
    Messages:
    3,203
    Gender:
    Male
    BC, Canada
    Vehicle:
    RIP 2006 Tacoma DCSB
    Tundra 5.7 mod
    Thank you!:)
     
    landphil, Feb 23, 2012
    #101
  2. Feb 23, 2012 at 7:38 AM
    #102
    Sandman614

    #102
    Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

    Joined:
    Oct 26, 2010
    Member:
    #45273
    Messages:
    35,960
    Gender:
    Male
    First Name:
    Tim
    Garner, NC/Boone, NC
    Vehicle:
    '06 SR5 Off Road
    ARB Front Bumper, Projector Headlights w/Slimcubby 4300K HID's, Oznium LED's, LED taillights, DIY Washable Cabin Moose Filter, Sockmonkey SR5 Off Road, Aux Audio plug, OME 886x, OME Nitrochargers, Wheelers 3 Leaf Progressive AAL, ImMrYo Rear-View Mirror Lift Bracket, Dodge D-Rings
    No problem. Figured id be nicer than just yelling to use the search. :)
     
    Sandman614, Feb 23, 2012
    #102
  3. Feb 23, 2012 at 10:07 PM
    #103
    TnRedNeck721

    #103
    TnRedNeck721 Nick Namer

    Joined:
    Mar 10, 2011
    Member:
    #52731
    Messages:
    23,847
    Gender:
    Male
    First Name:
    Zach
    TN
    Vehicle:
    07 TRD off road 4WD
    No mud flaps, plasti dipped emblems, and rear bumper, Weather tech digital fit, Bed mat from tractor supply. Pioneer 4400BH head unit. B.A.M.F bed rail tie downs. AVS vent visors.
    sub. ABS about put me in the ditch in snow 2 times this winter. and about put me in to a fence out back when it was raining and kinda muddy.
     
    TnRedNeck721, Feb 23, 2012
    #103
  4. Feb 27, 2012 at 9:47 AM
    #104
    Crom

    #104
    Crom Super-Deluxe Member

    Joined:
    Jun 22, 2009
    Member:
    #18782
    Messages:
    9,639
    Gender:
    Male
    First Name:
    Nick
    San Diego, CA
    Vehicle:
    2009 4x4 DCSB Camp Supreme
    Millions
    I regret not being able to devote more time to helping people with this... But I think you have the right idea. Can you take a picture and post what your IB1 plug looks like? Were you successful with this?
     
    Crom, Feb 27, 2012
    #104
  5. Feb 27, 2012 at 9:53 AM
    #105
    OZ-T

    #105
    OZ-T I hate my neighbour

    Joined:
    Dec 15, 2009
    Member:
    #27584
    Messages:
    50,587
    Gender:
    Male
    First Name:
    Peter North
    British Columbia
    Vehicle:
    Mag Grey 09 Trd Sport DCLB 4x4
    OME 885x , OME shocks and Dakars , Wheelers SuperBumps front and rear , 275/70/17 Hankook ATm , OEM bed mat , Weathertech digifit floor liners , Weathertech in-channel vents , headache rack , Leer 100RCC commercial canopy , TRD bedside decals removed , Devil Horns by Andres , HomerTaco Satoshi
    Will the bypass also disable the AUTO LSD / TRAC selections ?
     
    OZ-T, Feb 27, 2012
    #105
  6. Feb 29, 2012 at 11:16 AM
    #106
    T@co_Pr3runn3r

    #106
    T@co_Pr3runn3r XXXXXXXXXXXXXXXXXXX

    Joined:
    Jan 20, 2009
    Member:
    #12767
    Messages:
    14,635
    Gender:
    Male
    <----------------->
    Vehicle:
    08 RC Prerunner SR5
    Sub'd..............for near future free mod.
     
    T@co_Pr3runn3r, Feb 29, 2012
    #106
  7. Mar 2, 2012 at 7:38 PM
    #107
    AirTime604

    #107
    AirTime604 Member

    Joined:
    Feb 29, 2012
    Member:
    #73912
    Messages:
    22
    Gender:
    Male
    B.C., Canada
    Vehicle:
    2006 Taco DC SB 6-speed
    Too many...Will update this...
    So you tap into this wire (blue-yellow stripe), and then run it into a switch? Sorry bout the noob question, very interested in doing this mod right the first time. Thanks
     
    AirTime604, Mar 2, 2012
    #107
  8. Mar 2, 2012 at 10:37 PM
    #108
    5LUGTACO

    #108
    5LUGTACO Gear Head

    Joined:
    Aug 27, 2010
    Member:
    #42323
    Messages:
    663
    Gender:
    Male
    First Name:
    David
    California
    Vehicle:
    06 TACOMA 5 LUG
    Total Chaos Mid Travel, Sway away coilovers,31x10.50x15 goodyear wrangler authority's
    This will work for a non locking diff truck?
     
    5LUGTACO, Mar 2, 2012
    #108
  9. Mar 2, 2012 at 11:47 PM
    #109
    landphil

    #109
    landphil Fish are FOOD, not friends!

    Joined:
    Mar 3, 2011
    Member:
    #52290
    Messages:
    3,203
    Gender:
    Male
    BC, Canada
    Vehicle:
    RIP 2006 Tacoma DCSB
    Tundra 5.7 mod
    That's the idea. I haven't done it myself yet, but as soon as a few other projects are done I will be.
     
    landphil, Mar 2, 2012
    #109
  10. Mar 3, 2012 at 12:29 AM
    #110
    5LUGTACO

    #110
    5LUGTACO Gear Head

    Joined:
    Aug 27, 2010
    Member:
    #42323
    Messages:
    663
    Gender:
    Male
    First Name:
    David
    California
    Vehicle:
    06 TACOMA 5 LUG
    Total Chaos Mid Travel, Sway away coilovers,31x10.50x15 goodyear wrangler authority's
    Nice, I hate the way my brakes are off-road
     
    5LUGTACO, Mar 3, 2012
    #110
  11. Mar 3, 2012 at 2:03 PM
    #111
    m21knight

    #111
    m21knight Member

    Joined:
    Feb 25, 2012
    Member:
    #73568
    Messages:
    6
    Gender:
    Male
    First Name:
    Mike
    Central Vermont
    Vehicle:
    12' TRD Sport DC
    Hardwired Radar Detector Mod,
    If you perform the ground splice, you need to add a current limiting resistor to prevent a blown fuse. I would try a 1k resistor in line, also a resetable breaker smaller than the fuse that is blowing might prevent an unexpected fuse problem, you could also use a fuse in place of the breaker. All of these items are usually available from Radio Shack.
     
    m21knight, Mar 3, 2012
    #111
  12. Mar 6, 2012 at 5:47 PM
    #112
    tacomafide

    #112
    tacomafide Cheese it in there!

    Joined:
    Mar 6, 2012
    Member:
    #74350
    Messages:
    179
    Gender:
    Male
    First Name:
    Sean
    Alberta
    Vehicle:
    '10 DCLB TRD Sport+Leather Pkg.
    de-badged, de-stickered, no jewlery, level kit (removed after second front dif), tint, skid plate (now dented), front tow hook off of Land Cruzer, reciever d hook (cleavis), yellow wire mod, abs kill sw. mod, window visors, stubby antena, anytime reverse lights mod, anytime reverse camera mod, blizzacks on stealies, bed lights mod, weathertec mats allround,
    hey guys. thanks to all the helpfull ppl on here. i did this mod today. for the record my truck does NOT have lockers and DOES have VSC (car w/ squiggly line button). I have L.Green wire where others have Blue w/ yellow tracer. I used this LG wire. Mod went smooth (yes the blanks just pop out) I used the spot where Down Hill Assist button would be. Took no time at all. (cut LG wire move to sw. out of sw. back to LG wire. Beauty! works great, on the fly ability to shut off ABS but, turns off VSC as well (car w/ squiggly lines OFF indicator). So now it defeats my yellow wire mod and my 4H version of LSD. I can just turn back on ABS so its no biggy, but kind of a pain. Any solutions out there where i could Turn off ABS but leave VSC active??? I went and got stuck in some snow after doing this mod so I am pretty confident about it defeating my Yellow wire mod :)
    (i will figure something out to fill in the gaps around new sw.)

    photo (1).jpg
    photo (2).jpg
     
    tacomafide, Mar 6, 2012
    #112
  13. Mar 6, 2012 at 7:35 PM
    #113
    Namtinker

    #113
    Namtinker Member

    Joined:
    Dec 9, 2011
    Member:
    #68448
    Messages:
    8
    Gender:
    Male
    AB, CA
    Vehicle:
    Tacoma TRD 6 spd
    OK guys, I'm now cross-eyed from reading about the various methods to shut down the abs. Tried the method above, just ended up with the blown 10A fuse - and since I dislike the smell of burning wires... Tried the brake light like Sandman - no luck.
    So, anybody out there with another method? (I have a Canadian 07 TRD, 6 spd, so I guess that would qualify as 4WD with rear locker.)
    But then the locker mod (any one) has not worked either!
    Anybody else with the same configuration had any success?
    This before I start looking at fitting a switch on the ABS fuse line!
    Have not tried the current limiting resistor yet...
     
    Namtinker, Mar 6, 2012
    #113
  14. Mar 6, 2012 at 8:59 PM
    #114
    tacomafide

    #114
    tacomafide Cheese it in there!

    Joined:
    Mar 6, 2012
    Member:
    #74350
    Messages:
    179
    Gender:
    Male
    First Name:
    Sean
    Alberta
    Vehicle:
    '10 DCLB TRD Sport+Leather Pkg.
    de-badged, de-stickered, no jewlery, level kit (removed after second front dif), tint, skid plate (now dented), front tow hook off of Land Cruzer, reciever d hook (cleavis), yellow wire mod, abs kill sw. mod, window visors, stubby antena, anytime reverse lights mod, anytime reverse camera mod, blizzacks on stealies, bed lights mod, weathertec mats allround,
    What did u do exactly? If you ran the wire to ground with no load thats ur blown fuse. add the resistor and you should be golden.
     
    tacomafide, Mar 6, 2012
    #114
  15. Mar 7, 2012 at 6:22 AM
    #115
    Namtinker

    #115
    Namtinker Member

    Joined:
    Dec 9, 2011
    Member:
    #68448
    Messages:
    8
    Gender:
    Male
    AB, CA
    Vehicle:
    Tacoma TRD 6 spd
    Exactly as described in the thread - grounded through a switch - but without a resistor. Fuse just popped, and I was definitely not going to increase it.
    The brake light mod has no effect whatsoever.
    I'll try the resistor this weekend.
    One thing I've noticed by comparing the various photos. There are subtle differences in the wiring. I do not for instance have the blue/yellow wire at all. I had to go and trace the wire back. Still in the same location on the connector, but different colour.
    (Same thing on the locker mods - different colours - I had to use the location.)
    ABS light also does not come on in 4LO, so although the ABS "should" be disabled in 4LO (because the rear diff is automatically locked), I've never been able to verify.
    I wish I had the old Mercedes Gelandewagen (called G-Wagon over here) or the African Hilux - levers, no switches! :)
     
    Namtinker, Mar 7, 2012
    #115
  16. Mar 7, 2012 at 10:40 AM
    #116
    tacomafide

    #116
    tacomafide Cheese it in there!

    Joined:
    Mar 6, 2012
    Member:
    #74350
    Messages:
    179
    Gender:
    Male
    First Name:
    Sean
    Alberta
    Vehicle:
    '10 DCLB TRD Sport+Leather Pkg.
    de-badged, de-stickered, no jewlery, level kit (removed after second front dif), tint, skid plate (now dented), front tow hook off of Land Cruzer, reciever d hook (cleavis), yellow wire mod, abs kill sw. mod, window visors, stubby antena, anytime reverse lights mod, anytime reverse camera mod, blizzacks on stealies, bed lights mod, weathertec mats allround,
    Good call on not throwing a bigger fuse in. B&E or Active here in Cgy will have the resistors. Remember when choosing location for resistor that they give off heat. (with 12v it might not even be noticeable)
    Whoops thought you were in Cgy.... Derp
     
    tacomafide, Mar 7, 2012
    #116
  17. Mar 7, 2012 at 12:04 PM
    #117
    Namtinker

    #117
    Namtinker Member

    Joined:
    Dec 9, 2011
    Member:
    #68448
    Messages:
    8
    Gender:
    Male
    AB, CA
    Vehicle:
    Tacoma TRD 6 spd
    Did you have to install the resistor?
    I still have a bunch from other projects - will just have to brush up on the coding rings again!
    Enough power to gnd to pop a 10A @ 12+V, ... But without measuring the difference, it could be anything. There is a reason the ABS fuses are that large.
     
    Namtinker, Mar 7, 2012
    #117
  18. Mar 7, 2012 at 4:07 PM
    #118
    tacomafide

    #118
    tacomafide Cheese it in there!

    Joined:
    Mar 6, 2012
    Member:
    #74350
    Messages:
    179
    Gender:
    Male
    First Name:
    Sean
    Alberta
    Vehicle:
    '10 DCLB TRD Sport+Leather Pkg.
    de-badged, de-stickered, no jewlery, level kit (removed after second front dif), tint, skid plate (now dented), front tow hook off of Land Cruzer, reciever d hook (cleavis), yellow wire mod, abs kill sw. mod, window visors, stubby antena, anytime reverse lights mod, anytime reverse camera mod, blizzacks on stealies, bed lights mod, weathertec mats allround,
    No I didn't ground anything. Just interrupted wire with a sw. If I had needed to ground I would use the suggested size in this topic. Resistor band colors is all over the web for free
     
    tacomafide, Mar 7, 2012
    #118
  19. Mar 9, 2012 at 4:00 PM
    #119
    Relik

    #119
    Relik Well-Known Member

    Joined:
    Nov 8, 2010
    Member:
    #45891
    Messages:
    602
    Gender:
    Male
    First Name:
    Eddy
    Thousand Oaks, CA
    Vehicle:
    '11 TRD Sport PreRunner-Auto-Magnetic Gray
    Bilstein 5100s (Front & ext. Rear), Eibach coils @ 0, MaxTrac 4" Spindles, Light Racing UCAs, 1/4" lean spacer, All-Pro 3" Standard leafs, u-bolt flip kit, SpiderTrax 1.25" wheel spacers, 33" (285/70/17) TreadWright Warden A/T tires, extended lines
    I found an easy way to diable the ABS and Traction on my 2011 Sport, no locker. I had to repair my drivers side ABS cable that connects from the engine bay down to the spindle. The cable was damaged and my ABS/Traction lights came on (Disabled).

    Once I repaired the cable, ABS/Traction lights turned off and were then active. So all you have to do is disconnect the ABS connector from either side of the engine and they are off. or splice them from here and add a switch.
     
    Relik, Mar 9, 2012
    #119
  20. Mar 11, 2012 at 8:00 PM
    #120
    Oysterhead

    #120
    Oysterhead Well-Known Member

    Joined:
    Jun 26, 2011
    Member:
    #58878
    Messages:
    137
    Gender:
    Male
    Nashville
    Vehicle:
    '10 TRD OR
    Kings are king
    And for Off Road models with a locker?? What's the approach?
     
    Oysterhead, Mar 11, 2012
    #120
Page 6 of 14

Products Discussed in

CH4X4 Push Switch for Toyota Tacoma, FJ Cruiser, Land Cruiser, Fortuner, Hilux, 4Runner, Prado 12V 3Amp - VSC Symbol - Green LED
$23.98
To Top