Anyone with Toytec C/O and TC UCA and 285/75/16

if so what wheels (and tires) are you running and what is the backspacing and offset? I had no rubbing when i had the spacer lift but now that i have switched to "real" lift it has pulled the wheels under the truck and caused rubbing. i have the C/O up to about 3" lift at this point.
pics would be great too. thanks.
wondered if i need more or less backspacing? currently 4.5

 

bump.... nothing?
anyone, anyone............ Bueller?

 

I'm running the Moto Metal 955's 16x8, Backspace 4.50 in, Offset = 0 mm, 285/75-16 and I have no issues. Check my gallery out for pics

 

BTW what type/where of rubbing are you talking about?

 

are you running stock UCA? i am talking about rubbing on the frame and some on the front plastic. I was all clear with toytec C/O at 2.5" (just like my daystar spacers) until i put on the UCA which pulled the wheel under the truck more and then started rubbing.

 

No I'm running the TC UCA's. As far as the rubbing on the frame, you are most likely rubbing on the body mount and for the plastic you need to trim out your fender wells some.

 

yeah. i said frame but i guess it is really the body mount brace. I guess i should just crank up the C/O to 3" and see what happens then. just trying to keep it level without messing with the rear right now.
thanks