Toytec ultimate for Reg cab?

Are the spring rates on the ultimate kit acceptable for a reg cab? Or should I just stick with the OME Kit with the 884 light duty springs? Worried that the Toytec kit will give me a bad CV joint angle.

 

Well the ULK is adjustable so if the height is too much you can use the spanner wrench to wind it down a bit. I gotta warn you though, have a cheater bar and some WD40 or PB Blaster handy cause those things are a PITA to work with. Thought I'd thrown my back out after doing both sides
Edit: oh and I think the eibachs on the ULK are around 600# spring rate IIRC. Not sure what the 884s are.

 

OME