1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Need Pics of Front Diff. Drop Kit Installed

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Snyperx, Mar 17, 2009.

  1. Mar 17, 2009 at 5:13 PM
    #1
    Snyperx

    Snyperx [OP] Seniore Marcos

    Joined:
    Dec 23, 2008
    Member:
    #11838
    Messages:
    660
    Gender:
    Male
    Could someone post a picture of the the Toytec Front Diff. Drop Kit installed on an 05+ Taco? I was reading the instructions that came with the kit and they do not match my truck. It talks about removing the front skid plate removing 9 screws. Huh? My skid plate only uses 4. Also it talks about adjusting the mounting holes on the rear skid plate. Huh? My 2005 DC doesn't have a rear skid. Thanks!!
     
  2. Mar 17, 2009 at 9:11 PM
    #2
    Snyperx

    Snyperx [OP] Seniore Marcos

    Joined:
    Dec 23, 2008
    Member:
    #11838
    Messages:
    660
    Gender:
    Male
    I have no idea if the FJ and 05+ Taco have the same mounting for the front Diff. Sorry.
     
  3. Mar 17, 2009 at 9:57 PM
    #3
    Marc M

    Marc M Dirty White Boy

    Joined:
    Jun 20, 2008
    Member:
    #7441
    Messages:
    1,052
    Gender:
    Male
    First Name:
    Marc
    Washington, Pennsylvania
    Vehicle:
    '06 TRD O/R Dbl-Cab
    TRD Cat-Back, TRD CAI, 3" Lift, ATX Chambers, Color matched Grille and Door Handles, Scooped Hood, GrillCraft upper and lower, DTRL, Foglight Mod, Redline Hood Struts, 20% Tint all around, SGII, Blacked out dash, Extang Full-Tilt, etc, etc, etc.
    The Off Road package has a two piece front skidplate. There a 4 bolts holding the front section, and I believe you remove 2 more to drop the rear section.

    Marc M
     
  4. Mar 18, 2009 at 7:04 AM
    #4
    Snyperx

    Snyperx [OP] Seniore Marcos

    Joined:
    Dec 23, 2008
    Member:
    #11838
    Messages:
    660
    Gender:
    Male
    Ah, ok. I only have an SR5 so I only have the front skid.


    No one has a pic of the front diff drop kit installed?:(
     
  5. Mar 18, 2009 at 7:17 AM
    #5
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Is your lift already installed, and you have vibes in the front?
     
  6. Mar 18, 2009 at 7:54 AM
    #6
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    X2. Dont install the diff drop unless you REALLY feel its needed. All the lifts I have done on a second gen have not had vibes and have not had the diff drop installed.....well, only one and that was RidingonTRD's truck.....but he had the diff drop installed.
     
  7. Mar 18, 2009 at 7:59 AM
    #7
    mjp2

    mjp2 Living vicariously through myself Moderator

    Joined:
    Feb 16, 2007
    Member:
    #924
    Messages:
    21,889
    Gender:
    Male
    First Name:
    Milton Juevo Portimous II
    NJ
    Vehicle:
    Current: '21 Bronco Badlands. Previous: '06 TRD Access Cab, v6, 6-speed
    This is what it looks like:
    IMG_2062_c4187b55966bb69c79acd09703d9b2caa3c9c0f9.jpg

    And no, you don't need it.
     
  8. Mar 18, 2009 at 8:38 AM
    #8
    Marc M

    Marc M Dirty White Boy

    Joined:
    Jun 20, 2008
    Member:
    #7441
    Messages:
    1,052
    Gender:
    Male
    First Name:
    Marc
    Washington, Pennsylvania
    Vehicle:
    '06 TRD O/R Dbl-Cab
    TRD Cat-Back, TRD CAI, 3" Lift, ATX Chambers, Color matched Grille and Door Handles, Scooped Hood, GrillCraft upper and lower, DTRL, Foglight Mod, Redline Hood Struts, 20% Tint all around, SGII, Blacked out dash, Extang Full-Tilt, etc, etc, etc.
    IMG_2062_c4187b55966bb69c79acd09703d9b2caa3c9c0f9.jpg


    Why are there 2 spacers on the top of the crossmember ?? I will be installing one to get my CV's back at a better angle, I don't want to have to keep replacing boots, I've already done it once.

    Marc M
     
  9. Mar 18, 2009 at 8:57 AM
    #9
    mjp2

    mjp2 Living vicariously through myself Moderator

    Joined:
    Feb 16, 2007
    Member:
    #924
    Messages:
    21,889
    Gender:
    Male
    First Name:
    Milton Juevo Portimous II
    NJ
    Vehicle:
    Current: '21 Bronco Badlands. Previous: '06 TRD Access Cab, v6, 6-speed
    I knew someone was gonna ask. They shipped me the wrong kit and bolts were too long so I had some spacers made to take up the slack.
     
  10. Mar 18, 2009 at 9:08 AM
    #10
    luni

    luni Resident Gun-toting Hippie

    Joined:
    Apr 8, 2008
    Member:
    #5819
    Messages:
    1,225
    First Name:
    Burt's Mustache
    Ft Bragg, NC
    Vehicle:
    TRD OR
    Icon c/os, TSB 4 leaf pack, Unbreakable Fab tube winch bumper, Mile Marker SEC12000, Roadless Gear winch control panel, Bud Built skids, URD Pipe Bomb Y pipe, snorkeled rear diff breather, no carpet
    Lol couldn't just run up the street and get a shorter grade 8 bolt for 2 bucks?

    Man I wish you were coming to the URE Meet so I could get drunk and yell at your gigantic bolt spacers:D:eek:
     
  11. Mar 18, 2009 at 9:11 AM
    #11
    Dark Knight

    Dark Knight Well-Known Member

    Joined:
    Jul 18, 2008
    Member:
    #8006
    Messages:
    9,804
    Gender:
    Male
    First Name:
    Jeff
    NC/SC
    Vehicle:
    4Runner Trail, 88 pickup, Tundra Platinum
    A few bolts are different.
    :rofl::rofl:
     
  12. Mar 18, 2009 at 9:21 AM
    #12
    mjp2

    mjp2 Living vicariously through myself Moderator

    Joined:
    Feb 16, 2007
    Member:
    #924
    Messages:
    21,889
    Gender:
    Male
    First Name:
    Milton Juevo Portimous II
    NJ
    Vehicle:
    Current: '21 Bronco Badlands. Previous: '06 TRD Access Cab, v6, 6-speed
    There's no room for logic and reason where my truck build is concerned. :p
     
  13. Mar 18, 2009 at 9:27 AM
    #13
    luni

    luni Resident Gun-toting Hippie

    Joined:
    Apr 8, 2008
    Member:
    #5819
    Messages:
    1,225
    First Name:
    Burt's Mustache
    Ft Bragg, NC
    Vehicle:
    TRD OR
    Icon c/os, TSB 4 leaf pack, Unbreakable Fab tube winch bumper, Mile Marker SEC12000, Roadless Gear winch control panel, Bud Built skids, URD Pipe Bomb Y pipe, snorkeled rear diff breather, no carpet
    Don't feel bad. I hacked the front off a BB skid to fit under an all poop bumper. Bitchin part is now I need the front of the skid back + a couple inches for the new truck :/
     
  14. Mar 18, 2009 at 9:32 AM
    #14
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    I thought the whole idea behind the diff drop was to "help" with CV angles... Does it just not help enough to make a difference? If it doesn't, then I'm gonna remove mine since I'm installing my BB skids. I'd have to fab something up to make them fit with the skids like Silverback did...
     
  15. Mar 18, 2009 at 9:56 AM
    #15
    mjp2

    mjp2 Living vicariously through myself Moderator

    Joined:
    Feb 16, 2007
    Member:
    #924
    Messages:
    21,889
    Gender:
    Male
    First Name:
    Milton Juevo Portimous II
    NJ
    Vehicle:
    Current: '21 Bronco Badlands. Previous: '06 TRD Access Cab, v6, 6-speed
    You've got your builds mixed up. :rolleyes:
     
  16. Mar 18, 2009 at 10:00 AM
    #16
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    being as a 1" drop only lowers the axel 1/2", wich translates to a 3* or so change in CV angle, it really doesnt make a big difference.
     
  17. Mar 18, 2009 at 10:12 AM
    #17
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Whoops, you're right - you did it too... :eek:
     
  18. Mar 18, 2009 at 10:21 AM
    #18
    mjp2

    mjp2 Living vicariously through myself Moderator

    Joined:
    Feb 16, 2007
    Member:
    #924
    Messages:
    21,889
    Gender:
    Male
    First Name:
    Milton Juevo Portimous II
    NJ
    Vehicle:
    Current: '21 Bronco Badlands. Previous: '06 TRD Access Cab, v6, 6-speed
    Wait, he did something to his? Gah! I gotta dig a bit and see his solution. :eek:
     
  19. Mar 18, 2009 at 10:25 AM
    #19
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Yeah, and I'm still waiting on some detailed pics before I install mine...... :)

    :boink:
     
  20. Mar 18, 2009 at 10:28 AM
    #20
    mjp2

    mjp2 Living vicariously through myself Moderator

    Joined:
    Feb 16, 2007
    Member:
    #924
    Messages:
    21,889
    Gender:
    Male
    First Name:
    Milton Juevo Portimous II
    NJ
    Vehicle:
    Current: '21 Bronco Badlands. Previous: '06 TRD Access Cab, v6, 6-speed
    Just found it. Installed spacers and longer bolts to drop the full skid setup a bit. That was the first option I considered but went with modifying the skids instead.

    Honestly, after all is said and done, no diff drop really is the way to go on our trucks.
     

Products Discussed in

To Top