Anyone into R/C?

If its the stock AE it has between 40-50 oz/in, if you want more power, +-100 oz/in and .13 sec (60 degree) should be plenty

 

sweet. thanks! I'll look into it.

 

Hi tech has one for under 100 with 400oz it is bad ass if you want more power

 

Hahaha I'm scared that would break something if I went to full lock too hard. I don't really want to spend a whole lot of money on this..

 

This one is the one I'm thinking of going with, although I have no experience with Savox

http://www.amainhobbies.com/product...3311/n/Savox-SC-0254MG-Standard-Digital-Servo

 

I have a high-speed Savox in my Losi buggy, it is quite fast, but only a little faster than that Airtronics based on the specs I looked up. I used a cheaper high-torque Hi-Tec in my SC10 4x4, it is noticeably slower but works fine for my driving style.

 

Don't quote me on this but I believe you can program them to the specs you want too.

I had to get a BEC to get all the 400oz out of it.

The guys at the LHS did it for me.

 

Found a Solar Servo on hobbypartz.com for $22. 100.oz and all that good stuff. Out of stock, though. I might just check out what my LHS has in stock.

 

servo chart

i don't think it is up to date with the latest

 

Rookie move forgot to punch hole before I painted. Dam

 

For anyone in Cali Looking for an Axial Exo $275
http://losangeles.craigslist.org/lgb/tag/2922636211.html

 

I drilled mine after I painted it and it turned out fine.

 

I always drill/bore all holes before, cause you can see how/where to mark while it's still clear. IF protective film is missing for some reason, place a piece of tape over the hole on the outside f the body to prevent overspray.

 

I "used" to like power over speed, but now I seem to like both.

 

My buddy has been running one of these for over a year now. I'm thinking about buying one.

http://www.ebay.com/itm/220963802973?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

It replaced his Hitec...

 

Btw, I FINALLY sold the Slash over the weekend

 

Daddy you got a PM

 

Sounds weird.

 

I'm used to it... Replied.